精创温控器STC-1000X说明书用户手册.pdf

Efitecnh 5TC-1000X Microcomputer Temperature Controller User Manual will be displayed in the panel. Press 盘 or 军 button to scroll up or down rmenu iterms and display the corresponding code, Press 血 / 以 button to display the current parameter 5STC-1000X temperature controller features coolins and heating modes with autornatic Set-point, Press 盘 or 村 buttonagaintoincrease or decreasethevalue and press 全 /以 to Switch temperature unit switch between Celsius and Fahrenheit, termmperature control by set-point and differential termperature calibration, Cooling output protection delay, back to parameter code dijsplay. sensor fault alarm and other functions, The controller reserves an interface of RS-485 上 fyou need to save the settings, please press and release WU button and back to normal communication function for further connection to an Elitech loT module which makes display status. If not, just keep the controller inactive for 10 seconds, it will be back remote control available. to temperature display status,lf an error occurs durings saving settings, the panel will display Erand back to termperature display status in 3 seconds. 5pecifications 4. 0perations