Schneider Electric施耐德140XBP00300, Three Position Backplane安装和用户指南(英语).pdf

Modicon 140 XBP 003 00 Three Position Backplane Publication # 043507393 Version 2.0 The 论 desi 如 Secure and connect all used in the drops. 上 contains a passive Gircuit board which permits mmodules to comrmunicate with each other and to identify their slot numbers without further Switch settings- Refer to the folowing table for a front view illustration and also 站 iOns cf the (at | ions are norninal)- LegSend Caiiout Millimeters Inches A 290 11.42 B 270 10.63 C 175.5 6.91 D 94.5 3.72 E 40 0.39 F 15 0.59 G 143.13 5.64 H 143.08 4.45 Mounting holes 旨 | sa | 03 Optionaliocationsfor Pius ca cable grounding Ground Lower 心 于 5 (da) 上 0.31 Screws Holes (2 holes} Threaded mounting holes forhatf and fl height modules Note: Backplane weight = 0.75 lbs (0.34 kg} 四 站 6 [5 在 村” Note: T meet vibrationshock specificafions, the backplane must be mounted Usmg ing ail speci ing holes. The i using (described below). The recomrnended lengih for the mounting screws should be within the fotowing range: D.24in (S mm)~0.52jn (13 mmy) The head height of the screws should hot exceed 0.14 in {3.5 mm 一 1~ Quantum Aixomation