Schneider Electric施耐德E8315USB安装和用户指南(英语).pdf

Schneider PPLICATION GUIDE Electric 13A Socket with USB Thank you for choosing Schneider Electric AvatarCn series products. To ensure proper application of our product please read through the following information before installation and use. This application guide applies to the following products. (Notessuffx_WEANGIGHILANAWD/ST_C5,G2 etc. mean the colors and sales areas) Cat, No. Description E8315USB 13A250VSWSktw2.1AUSB Charger SPECIFICATIONS USB Input Voltage: 220-250 V- USB Input Frequency: 50/60 Hz USB Input Current: 0.45AA USB Output Voltage: 5VDC USB Output Current 2.1Amax 辣 USB Protection: Over heat, over current over voltage 扣 13A Socket Voltage: 250V- 虽 13A Socket Current: 13 六 轩 Mounting Centre 60.3 mm 吕 Operating Temperature- -5Ctor40C 四 IMPORTANT NOTE The products must be installed by qualiied electricians- Check your local wiring regulations before installation- Itis recommended to install the product with a 47 mm wallbox. Suitable for mounting on concrete or other non-combustible surface only. Protect the surround to prevent damage during product installation 中 中 上 Tumn offthe power supply when you clean the product Use a piece of soft， slighty-moistened cloth ortissue paper to wipe offthe dust and dirt on the surface_Avoid using corrosive chemicals 7 了。 This productis permanently connected and does not contain a power isolation device or switch if power isolation to the productiis required, obtain a suitable external isolation device or switch and installin an accessible location 8， Ensure your devices Battery Charging Specification is suitable for this USB Charger before charging- 9， Do not insert metal objects into USB Charger, 10，User willfeel some heat at the product surface when charging is in progress. 11. Indoor use only WIRING DIAGRAMS