DIEBOLD迪堡家家堡 JJB-20E-20EB-23EB-27EB-30EB-37EB USER’S MUANAL(英文) 说明书用户手册.pdf

Please read this instructions carefully before using this container.The initial code forthis containeris 1,5,9. FirstTime Operation First, openthe door according to Using Override Key”remove 4*1.5V/AA batteries inside the container then putthe batteries into its compartment (See“Changing battery”) To Open Container After entering the code, Press(#)to confirm; with green light coming on, turn the knob clockwise Ato open the door within 5 seconds. 人 Note: The initial code 1,5,9 should be usedto openthe dooratthe firsttimeiand after opening the door please changethe initial code(See To Set Code)， The interval between two pressing work should be not more than 20 seconds ;otherwise this pressing work will be invalid. To Lock Container Closethe doorand turn the knob counterclockwise ms ， To Set Code With the door open, press the red coding button on the inside ofthe door and come into a phase of setting codei then enteryour new code(1-8digits)and press(#)to confirm after entering new code. Note: With the door open, try the new code severaltimes after setting it, then close the doorand keep your new code atthe safe place. Coding button Using Override Key Remove the coveron panel,the override key hole can be seen, and insertthe override key in it, then turn the override key counterclockwisewandthe knob clockwisewnto open Override the door. key hole Cover Changing Battery RedLEDflashing indicates the low power of batteries on using this container; please change the batteri