RockwellAutomation罗克韦尔200A Disconnect Power Wire Lug Modification用户手册说明书.pdf

Instructions 200A Disconnect Power Wire/Lug Modification 200A Disconnect Power If the unit with the 200A disconnect being replaced was manufactured prior to Wire/Lug Modification August 23, 2004, this instruction sheet may be required. ATTENTION This procedure requires verification that the motor control center unit’s remote power source(s) is disconnected and the respective disconnect(s) is locked in the OFF/O positions. In the case of a plug-in unit, remove the unit ! from the motor control center for servicing. Failure to follow these recommendations will cause equipment damage as well as severe injury or death to personnel. ATTENTION When drilling power wire connection lugs within the unit, take precautions to ensure metal particles do not fly into any of the electrical components within the unit. Metal particles that come into contact with electrical components ! will cause short circuits. Failure to take proper precautions