美国船级社 ABS Rules for materials and welding-2023 材料和焊接规则.pdf

Rules for Materials and Welding Part 2 January 2023 RULES FOR MATERIALS AND WELDING JANUARY 2023 PART 2 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 © 2023 American Bureau of Shipping. All rights reserved. ABS Plaza 1701 City Plaza Drive Spring, TX 77389 USA PART 2 Foreword (1 July 2021) For the 1996 edition, the “Rules for Building and Classing Steel Vessels – Part 2: Materials and Welding” was re-titled “Rule Requirements for Materials and Welding (Part 2).” The purpose of this generic title was to emphasize the common applicability of the material and welding requirements in “Part 2” to ABS classed vessels, other marine structures and their associated machinery, and thereby make “Part 2” more readily a common “Part” of the various ABS Rules and Guides, as appropriate. Accordingly, the subject booklet, Rules for Materials and Welding (Part 2), is to be considered, for example, as being applicable and comprising a “Part” of the following ABS Rules and Guides: ● Rules for Building and Classing Marine Vessels ● Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways ● Rules for Building and Classing Mobile Offshore Units ● Rules for Building and Classing Steel Barges ● Rules for Building and Classing High-Speed Craft ● Rules for Building and Classing Floating Production Installations ● Rules for Building and Classing Light Warships, Patrol and High-Speed Naval Vessels ● Rules for Building and Classing Yachts ● Guide for Building and Classing Liftboats ● Guide for Building and Classing International Naval Ships In the 2002 edition, Section 4, “Pip