The Operating Of SICK S3000 CDS施克软件教程.pdfVIP

Modify Safety Area With SICK Software 使用SICK软件修改安全区域 识别设备与读取数据 Identify Device And Read Data 识别设备与读取数据 Identify Device And Read Data • 打开项目文件，右键Ethernet Communication, 选择identify,弹出对话框。勾选需要操作的设 备，开始识别。 • Open our document, click Ethernet Communication with right button, dialog box will open. Select devices which you need, start identifying. 识别设备与读取数据 Identify Device And Read Data 识别设备与读取数据 Identify Device And Read Data • 完成识别后，系统会提示是否读取设备组 态信息。 • After finish identifying, system will mention if you want to read the configuration. 识别设备与读取数据 Identify Device And Read Data • 完成读取后，图标会变亮。 • Relevent icons of scanner will be light. 识别设备与读取数据 Identify Device And Read Data 识别设备与读取数据 Identify Device And Read Data • 双击需要操作的Scanner 图标,然后点击需要操作 的区域，安全区域将会显示。 • Double click the scanner icon which you need, then click safety area which need to be operated, the area will be displayed on the main screen. 查看与更改安全区域 View And Modify Safety Area 查看与更改安全区域 View And Modify Safety Area • 如图，粉色区域为当前的安全区域。 • As the picture, the pink area is the current safety area. • 蓝色线条的轮廓为Scanner当前探测到的周边区域。 • The blue surrounding contour is the area where the scanner is detecting. • 可以通过 图标切换是否显示Scanner可检测到的周边 轮廓。 • We can switch that the blue surrounding contour is displayed or not by the icon • 可以通过选择 图标更改需要的安全区域。 • We can modify the area where we need after select the icon 查看与更改安全区域 View And Modify Safety Area 查看与更改安全区域 View And Modify Safety Area • 如图，红色线条的区域说明Scanner探测到有人 进入安全区域。 • As the picture, the area with red line represents that the scanner is detecting someone staying at the safety area. • 当然，有时Sc