ABB Technical Data[EN] SU S 30.640.2 数据表(英语)说明书用户手册.pdf

— TECHNICAL DATA ABB i-bus® KNX SU/S 30.640.2 Uninterruptible KNX Power Supply, 640 mA Device description The KNX Power Supply SU/S 30.640.2 The device is a modular installation device provides the system voltage (SELV) for KNX (MDRC) in pro M design. With a module width components. of 8 division units (DU), the device is designed for installation in distribution boards on a 35 ABB offers a range of matching KNX power mm mounting rail. supplies. In addition to the standard devices, devices with diagnostic or bus-monitoring The connection to the ABB i-bus® KNX is functions are available for more complex established via a bus connecting terminal on applications. the front. All ABB KNX power supplies have an integrated After connecting the mains voltage, the unit is choke. ready for operation. Device functions The uninterruptible KNX power supply Up to two 12 V lead gel accumulators can be generates and monitors the KNX system connected to buffer the KNX system voltage in voltage. The integrated choke decouples the the event of mains voltage failures. The bus line from the power supply. batteries are charged via the SU/S 30.640.2. A temperature sensor is used to control the When the reset button is pressed, the overload charging voltage. In the event of a mains indicator and the fault signal relay are reset. If voltage failure, the SU/S 30.640.2 is powered the fault was not corrected before the reset by the batteries. button was pressed, the fault is still present, the floating