6安全宣传教育培训活动记录.doc

6安全宣传教育培训活动记录 嘉兴市道路运输行业 安全管理工作台帐之 六 安全宣传教育培训 活 动 记 录 , 至 , 单 位 嘉兴市公路运输管理处印制 年 月 to comply with the requirements. (6) pressure pipes are installed according to the design requirements of the system pressure test, segmented tiered when pressure testing to be carried out in sequence, drainage, stormwater pipes to do water testing, and recording, pressure test failed or untested pipeline may not be concealed. Test pressure is the pressure piping installation one stops. (7) the control interface of pipeline leakage from the processing begins. Thread processing to tight fit, length should comply with the requirements. Flange after welding to check end verticality, checking the welding quality. (8) electrical engineering should control the grounding line of weld quality and laying of pipeline quality, timely measurement of grounding resistance, and completes the record. (9) the phase and neutral and ground wire to strictly control the installation location may not be wrong, to multi color lines as required. (10) the distribution box, distribution bottle Shell to a separate ground line, shell transitions can not be used. (C) the pipeline installation engineering 1. construction sequence (1) be familiar with design drawings and related technical information; (2) construction survey and setting out; (3) cooperate with the reserved, embedded civil work; (4) pipe and tube processing (5) support (hanging) production; (6) the pipe prefabrication and Assembly; (7) the pipe laying and installation; (8) the pipes connected to the device; (9), instrumentation and piping installed; (10) pressure test and cleaning (blowing) washing; (11), anti-corrosion and thermal insulation; (12) acceptance. 2. construction conditions (1) the design drawings, specifications and other technical documentation is complete, and after a trial. (2) construction project 安全宣传教育培训活动记录 年 月 日 星期 活 动 名 称 参 加 对 象 地 点 主讲人 参 加 人 数 记录人 教育培训活动内容,可粘附活动照片,: 2entation is complete, and after a trial. (2) con