爱立信NSASA 双模设置Co-Cell knowledge sharing.pptxVIP

5G SA FOANSA/SA CO-CELL IntroductionKnowledge Sharing by 5G SA FOA team 1NSA SA共模小区概述2NSA SA共模小区配置3NSA SA UE初始接入流程及差异4NSA SA共模小区接入测试案例和结果AGENDA NSA SA共模小区概述 NSA SA共模小区简介NSA（非独立组网）可充分依托运营商4G网络优势，快速开展5G 初期的大带宽业务；SA（独立组网）为支持5G全业务提供了可能，支持低时延、大连接等5G未来业务。NSA SA共模小区同时支持NSA SA双架构模式，NSA终端和SA终端实现同站共存，在5G发展初期充分保障了不同终端用户的网络体验，并支持NSA网络向SA网络平滑升级。 NSA SA共模小区概述Network Architecture Differentiation of NSA UE and SA UEThere is a need to identify whether it is a NSA UE or SA UE in the NR cell.Differentiated handling based on SA or NSA UE is required in UPC after receiving Msg3. There is a difference between a NSA and SA UEs in what is sent for Msg4. EIPS 15.3 uplift has introduced the required changes to differentiate between the two modes. If the MOM parameter secondaryCellOnly is set to “false” then SA (or NSA+SA) applies. If secondaryCellOnly is set to “true” then NSA applies.NSA SA共模小区概述 NSA SA共模小区配置 NSA SA共模小区配置Pre-requisiteeNB has License FAJ 121 4843 Basic Intelligent Connectivity (LTEFDD/TDD) to be installed and to have service state “OPERABLE”.The gNB has both NG interface towards the 5GC and S1-U interface towards EPC enableDefine data type to test with and ensure NSA UE and SA UE can send/receiveEnsure a working 5G EPC and when gNB is configured as NSA only the NSA UE can rach on NR cell (Real 5G EPC signaling) and can send/receive data. Capture performance baseline of this NSA only configuration.On the cell, set SecondaryCellOnly to false and re-capture the performance baseline of the NSA UE, compare with NSA only configuration.Ensure a working 5G core is available and that when gNB is configured as SA only the SA UE can rach on NR cell (5Gcore signalling: AMF/UPF) and send / receive data.For NSA/SA testing gNB/eNB Configured for NSA/SA: (X2 link up/enabled, connection to both 5G EPC(S1-u) and 5G core(N2,N3) are enabled and active, Cells are up and enabled, secondaryCellOnly attribute is set to false)The functionality in this SP is considered as a basic part of SA.