环氧树脂自流平地面施工工艺1.docVIP

  1. 1、本文档共20页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
环氧树脂自流平地面施工工艺1 项目概况: 一、施工准备 1、材料准备 1.1主要材料: 环氧树脂地流平涂料、基层处理剂(底油)、面层处理剂、填平修补腻子,填料如石英砂、石英粉。环氧树脂地流平涂料目前多为双组份,应按一定配比充分混匀,其质量标准见下表。 表1 环氧树脂地流平涂料的技术指标 试验项目 技术指标 涂料状态 均匀无硬块 涂膜外观 平整光滑 干燥时间 表干(25?) ?4 h 1.2储运与贮存: 实干 (25?) ?24 h 密闭储运,避免包装破损 耐磨性(750g/500r) g ?0.04 和雨淋。置于干燥通风处,避免高温,严禁阳光下曝晒及冷冻。在附 着 力(级) ?1 5-40?时贮存期为6~12个硬度(摆杆法) ?0.6 月。 对比率 ?0.87 2、机具准备: 光泽度(,) ?30 2.1漆刷或滚筒、盛水桶、 耐冲击性 40Kgcm 无裂纹、皱纹及剥落现象 低转速搅拌器(400转/分钟)或 电动搅拌枪、专用钉鞋、镘刀、专 耐水性 96h无异常 96h无异常 用齿针刮刀、放气滚筒。 耐碱性(10,NaOH) 96h无异常 2.2施工机具在使用前需 耐盐水性(10,NaCl) 清洗干净。用完后的工具要在干固 时间内用水清理,以免影响下次使用。 3、基层处理: to make the following points: the room temperature between relative humidity maintained at 30%-55%, and 7 days a week, 24 hours a day is required. Keep free of dust and well ventilated, brightness of at least 50 candle light. Provide the right door, the door should open outward. To have a sufficient number of dedicated power outlet, provides volt 15 amp AC power to the device. This power supply for power and air conditioning or lighting circuits apart. the whole systems color management according to the design of the comprehensive wiring system, the whole system to the implementation of an integrated color management, that is, different regions using different colors to the mark, specific color meanings are as follows: Blue: represents the regional level subsystems, terminating in the blue area of the cables between the junction between levels to information outlets. White: represents the vertical cable subsystem, terminating in the white areas of the main cable wiring and wiring between floors. Green: input from the Central Office trunks Purple: from the data of common devices such as switches to lead. 2.6.7 design results in accordance with the ideas for the design of comprehensive wiring system, in line with the new plant office building, workshop technology requirements, 155Mbps ATM, and video transmission and other requirements, in line with the 15-20 development of data communication within the development t

文档评论(0)

Suzaku + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档