RockwellAutomation罗克韦尔OptixPanel Compact Operator Panels Installation Instructions用户手册说明书.pdf

Installation Instructions Original Instructions OptixPanel Compact Operator Panels Bulletin 2800C Equipment with the UL/cUL mark complies with the requirements of UL 61010-1, UL 61010-2-201, CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010- 2-201. Copies of the certificate of compliance are available at rok.auto/certifications. ATTENTION: This equipment is intended for use in a Pollution Degree 2 industrial environment, in overvoltage Category II applications (as defined in IEC 60664-1), at altitudes up to 2000 m (6561 ft) without derating. This equipment is considered Group 1, Class A industrial equipment according to EN 61326-1. Without appropriate precautions, there can be potential difficulties with electromagnetic compatibility in other environments caused by conducted as well as radiated disturbance. In addition to this publication, see the following: • Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1, for more installation requirements. • UL 50, UL 50E, CSA C22.2, No. 94.1, and CSA C22.2, No. 94.2, as applicable, for explanations of the degrees of protection provided by enclosures. European Union Directive and UKCA Compliance This equipment meets the European Union Directive and UK requirements when installed within the European Union, UK, or EEA regions and have the CE or UKCA marking. A copy of the declaration of the conformity is available at rok.auto/certifications. ATTENTION: This operator panel is intended to operate in an industrial or control room environment, which uses some form of power isolation from the public low-voltage mains. Some computer configurations cannot comply with the EN 61000-3-2 Harmonic Emissions standard as specified by the EMC Directive of the European Union. Obtain permission from the local power auth