油罐车卸油步骤、加油站服务规范、加油站设备管理.docVIP

油罐车卸油步骤、加油站服务规范、加油站设备管理 油罐车卸油步骤 1 、 卸油十六步 一、引导 将车子引导到卸油处(平地) 二、检查 1、安全提示:严禁烟火;严打手机;熄火卸油; 2、加油场地安全:是否有闲杂人员;是否有违章作业;是否存在 动火作业; 3、油罐车安全:油罐车是否熄火;油罐车是否带有阻火帽;油罐车是否佩戴有灭火器;油罐车自身的静电接地是否符合要求;油罐车卸油口是否有滴漏现象; 4、油罐区安全:是否有火种;通气管是否通畅;附件是否完好; 各种管线是否有渗漏;计量口是否密闭;静电接地是否有; 三、静电接地、消防器材 检查静电接地是否有效;保证静电接地接在油罐车的有效部位消防器材种类:35kg推车式干粉灭火器1个;灭火毯2块消防沙和消防锹摆放 位置:35kg推车式干粉灭火器放在上风口，油罐8―10米的有效距离;灭火毯(一角折起)1块放在卸油口，1块跟随计量员上车;确保灭火 器和灭火毯全部处于临战状态; 四、验单 核对出库单，同时提醒司机不要远离现场; 五、质量验收 检查项目:油品色泽、气味、有无积水、有无杂质、品种与出库单是否一致; 六、数量验收 测量化工油罐车[/url]油高、水高、油温，计量油品实际数量和损耗情况; 七、连接管线 核对连接是否正确;检察管线;按照流程连接，保证接头紧密结合;卸油管自然弯曲; 八、确认储油罐空容量 通过液位仪或人工测量确定空容量;如果需分罐装卸需要计量装卸数量，并告知司机; 九、检查计量口 检查计量口是否密闭良好; 十、开始卸油 提醒司机缓慢开启油阀门;计量员和司机不得远离现场，并集中精神监视卸油情况; 十一、卸油完毕 检查是否卸净; 十二、拆卸管线 拆卸管线之前，必须先关闭卸油阀门，并先拆卸油罐车一端，控净管内余油，并盖好卸油帽，最后整理好静电接地; provisions and time limits, monitoring instruments and equipment installation, Embedment measures submitted plans, planting details and measures of protection submitted to the supervisor for approval. (3) construction of I Board will be coordinated under the auspices of the supervisors monitoring equipment installation, Embedment interference and civil construction and equipment installation, Embedment plans included in the construction schedule, planted for the timely provision of necessary face and working hours. (4) will strictly follow the approved installation, Embedment in the construction plan and manufacturers use the specification of procedures and methods of monitoring instruments and equipment installation, Embedment. Buried in the install process, I Council inspectors should work closely with the supervisor, supervisor to report problems in a timely manner, and to provide relevant quality records. (5) construction process due to damage caused by any monitoring equipment for construction, we will promptly repair or replace equipment caused the shift should be corrected immediately, until a supervisor recognized and made detailed records. (6) monitoring equipment installation, Embedment