TLE4206-2G 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

1-A DC Motor Driver for Servo Driver Applications TLE 4206-2G Overview Features • Optimized for headlight beam control applications • Delivers up to 0.8 A continuous • Low saturation voltage; typ.1.2 V total @ 25 °C; 0.4 A • Output protected against short circuit • Overtemperature protection with hysteresis • Over- and undervoltage lockout • No crossover current • Internal clamp diodes • Enhanced power packages • Range low-voltage detection with hysteresis • Green Product (RoHS compliant) PG-DSO-14 • AEC Qualified Type Ordering Code Package TLE 4206-2G on request PG-DSO-14 Description The TLE 4206-2G is a protected H-Bridge Driver designed specifically for automotive headlight beam control and industrial servo control applications. The part is built using Infineons bipolar high voltage power technology DOPL. The standard enhanced power PG-DSO-14 package meets the application requirements and saves PCB-board space and costs. The servo-loop-parameter pos.- and neg. Hysteresis, pos.- and neg. deadband and angle-amplification are programmable with external resistors. An internal window- comparator controls the input line. In the case of a fault condition, like short circuit to GND, short circuit to supply-voltage, and broken wire, the TLE 4206-2G stops the motor immediately (brake condition). Data Sheet 1 V1.4, 2018-07-02 TLE 4206-2G Furthermore the built in features like over- and undervoltage-lockout, short-circuit- protection and over-temperature-protection will open a wide range of automotive- and industrial applications. The TLE 42