大型LNG储罐保冷施工方案.docx

大型 LNG 储罐保冷施工方案 范围 Scope 该程序适用于 LNG 项目大型储罐保冷的施工。 This procedure details procedure for the in sulati on con structi on of large LNG tank. 概况 Ge neral 整个罐的绝热施工主要包括罐底绝热热转角保护板与外罐衬板夹层绝热、环形空间绝热，铝 吊顶绝热、接管的绝热四部分。混凝土环干沙的铺设、泡沫玻璃铺设、珍珠岩混凝土块、毛 毡以及玻璃棉的安装。主要绝热材料包括：罐底部分：珍珠岩水泥块、泡沫玻璃块、玻璃棉、 干沙等；环形空间绝热部分：珍珠岩粉末、弹性毡、玻璃纤维布等；铝吊顶绝热部分：玻璃 布、玻璃棉等；接管绝热部分：玻璃棉、玻璃布、聚氰尿酸酯泡沫、聚氨酯泡沫、玻璃纤维 毡。 In sulatio n con struct ion covers the places of tank bottom, annu lar space,suspe ndeddeck, no zzle. Ring concrete dry sand, cellular glass， perlite concrete block, capping material, glass wool. Main insulation material, for tank bottom: perlite concrete block, cellular glass, glass wool, dry sand; for annular space: perlite powder, resilient blanket, fiberglass cloth; for suspendeddeck: glass cloth, glass wool; for no zzle: glass wool, glass cloth, PIR, PU foam, fiberglass bla nket. 编制依据 Referenee 施工图纸。Construction Drawing of LNG Storage Tank 保冷施工 Insulation Construction 底部保冷施工 tank bottom insulation 底部保冷施工顺序 con struct ion seque nee of tank bottom in sulati on 施工前提条件 eonstruetion preparation 4.121 气吹顶完成； complete roof air raisi ng 确保底部衬板清洁干净； clea n bottom liner plate 根据 LNG 储罐绝热材料检验和测试计划对到货材料进行检查； Check insulation materials as per inspection plan. 施工按照储罐绝热图纸检验和测试规范的要求进行； Con duct con structi on as per test specificatio n. 与土建施工单位协商好混凝土找平的时间，并完成中间交接程序； Con tact with civil subc on tractor and confirm con crete leveli ng, finish in termediate accepta nee procedure. 外罐底部衬板和 EL105.800 墙体衬板安装完成并经过检查验收； Complete in stallati on of tank bottom liner plate and EL105.800 wall li ner plate, and accepted by releva nt parties. 对现场施工人员进行技术交底，明确安装顺序、铺设要求。 Make tech ni cal briefi ng to con structi on workers on in stallati on seque nee and requireme nt. 标记 marks 根据施工图纸在底部衬板上确定底部干沙铺设位置、混凝土环位置、泡沫玻璃位置。 As per con struct ion draw ing, to confirm dry sand layi ng place, ring con crete place and cellular glass place on tank bottom liner plate. 底部保冷主要实物工作量： Qua ntity of tank bottom in sulation 混凝土环体积：143m3 Ring eon crete cube: 143m3 珍