福禄克Fluke 700 PMP 压力泵700PMP 说明页.pdf

® 700PMP Precision Pressure Pump Instruction Sheet Introduction Warning It is imperative that all system The Fluke 700PMP is a tube type, cylindrical pressure is relieved prior to making shaped hand pump with a T handle at the any connections or disconnections. compressor end and a round knob at the volume Failure to relieve system pressure adjust end. The overall length is between 11.5 could result in serious personal (full extension) and 8.5 (fully collapsed). The injury or equipment damage. Even pump incorporates a needle valve for venting nominal pressure values can and a volume adjust vernier for precision generate extreme force if fitting or adjustment of pressure. tubing failure occurs due to improper Pressure connections are made through one 1/8 installation or usage. Since the pump NPT internally threaded fitting. The pump is is capable of generating pressures small in size, lightweight and ruggedly exceeding 100 psig/70 bar, it is constructed to withstand typical field use. important that all pressure connections and test procedures be