福禄克Fluke PQ400 Electrical Measurement WindowPQ400 说明页补遗.pdf

Supplement Manual Title: PQ400 Instructions Part Number: 4954885 Supplement Issue: 2 Print Date: October 2018 Issue Date: 7/19 Revision/Date: 1, 2/19 Page Count: 1 This supplement contains information necessary to ensure the accuracy of the above manual. © 20 19 Fluke Corporation. All rights reserved. x PQ400 Instructions Supplement Change #1, 691 On the 3rd page, replace the 6th bullet with: • Use a certified circuit breaker marked as the disconnecting device in an easily reached location suitable for the wire gauge used for the voltage inputs to the Product. On the 13th page, under Environment, replace the Humidity with: Humidity10 % to 90 % (non-condensing) in dependency of temperature according to IEC 60721-3-3 Class 3K6 (modified): -25 °C to 35 °C: 10 % to 90 %, 50°C: max. 35 %, 60°C: max. 23 % On the 14th page, under Voltage, replace the Wire gauge with: Wire gauge solid/flexible: 0.25 mm² to 1.5 mm² (AWG 24 to AWG 16), rated 65 ºC min Change #2, 730 On the 6th page, under Before you Start, replace with:  Punch/Die 115.42 mm (4.54 in), for example Greenlee 742BB On the 7th page, under Site Preparation, replace step 3 with: 3. Use the Punch/Die with electro-hydraulic hole punch to make the 115.42 mm (4.54 in) hole. 7/19 1