tmp行业分析报告.docx

tmp行业分析报告 Abstract This report aims at analyzing the TMP (Thermomechanical pulp) industry comprehensively. Firstly, the definition, classification, and characteristics of the industry are defined. Then, the report discusses the industrial chain and development history in the TMP industry. After that, it elaborates on the industry policy files, economic, social, and technological environments. Furthermore, the report investigates the driving factors, current status, pain points, and suggestions for development of the industry. Lastly, the report presents the market trends, competition pattern, representative enterprises, industry chain description, SWOT analysis, and industry concentration. 1. Introduction TMP refers to thermomechanical pulp, which is made mainly from spruce and fir fibers and mixed with mechanical pulp. TMP is widely used in printing and writing papers, linerboard, and other papers. The report aims to analyze the TMP industry from in-depth technological, economic, and marketing perspectives. 2. Definition, Classification, and Characteristics of TMP Industry TMP pulp refers to the pulp obtained by breaking and refining wood chips with steam under high temperature and pressure. Based on the classification of pulp, TMP pulp, as a type of mechanical pulp, has lower pulp yield and higher energy consumption than chemical pulp. Based on the way of the refining process, one-stage refining and two-stage refining methods exist for TMP pulp. According to different end-use purposes, TMP pulp has different characteristics, including low freeness, high strength, high light scattering coefficient, high opacity, and good formation. 3. Industrial Chain and Development history The upstream industry of the TMP industry includes the forest harvesting and the transportation of roundwood to pulping mills. The midstream industry is the pulp production process, including energy supply, wood chip preparation, and the refining system. The downstream industry is the paper and