垃圾焚烧发电厂垃圾储坑各部位构造工艺改进.pdfVIP

建筑技术 Construction Decoration 垃圾焚烧发电厂垃圾储坑各部位构造工艺改进 朱江 六安三峰环保发电有限公司  安徽 六安  237000 摘  要 生活垃圾焚烧处理和发电技术在当前具有环保和能源的双重效益，也是未来垃圾处理的重要方向之一，我 国垃圾焚烧发电技术的应用在上个世纪从无到有，发展极为迅速，近年来我国城市生活垃圾焚烧发电技术应用广 泛，工艺技术相对成熟，且趋于规模化发展。本文以安徽省六安市生活垃圾焚烧发电项目为例，主要对该类项目中 重要部位“垃圾储坑”相关构造、工艺要点进行分析总结，为后续焚烧发电项目提供参考。 关键词 垃圾焚烧；垃圾储坑；工艺改进 Construction and Process Improvement in Each Part of Waste Storage Pit of Waste Incineration Power Generation Plant Zhu Jiang Lu’an Sanfeng Environmental Protection Power Generation Co., Ltd., Lu’an 237000, Anhui Province, China Abstract Domestic waste incineration treatment and power generation technology has the dual benefits of environmental protection and energy at present, and is also one of the important directions of future waste treatment. The application of waste incineration power generation technology in China emerges in the last century, and develops in extremely rapid speed. In recent years, domestic waste incineration power generation technology in China’s city is widely used, the process technology is relatively mature and tends to scale development. Taking the domestic waste incineration power generation project in Lu’an City of Anhui Province as an example, this paper mainly analyzes and summarizes the relevant construction and process points of the “waste storage pit”, which is the important part of such projects, and provides reference for subsequent incineration power generation projects. Key words waste incineration; waste storage pit; process improvement 引言 板基材屈服强度≥330MPa ）；②墙皮钢檩条；③200mm厚煤矸 垃圾储坑是生活垃圾焚烧发电厂中垃圾存储的位置，起着 石空心砌块（容重≤1100kg/m³ ）。 调节垃圾数量、控制入厂、入炉垃圾量的作用，垃圾通过在坑 1.3 垃圾储坑内壁、渗滤液收集池内壁防腐做法 内的抛洒、混合、发酵、沥水等过程，使得垃圾在入炉焚烧之 隔离层为环氧玻璃钢（三布四脂），面层为10mm环氧砂 前提高热值