乘波构型设计及表面热流计算的中期报告.docxVIP

乘波构型设计及表面热流计算的中期报告 【摘要】 本报告介绍了乘波构型设计及表面热流计算的中期进展情况。首先，我们对乘波构型进行了初始设计，并采用CFD方法进行了流场分析。然后，我们开展了乘波管及表面热流计算的相关研究。通过数值模拟，我们得出了乘波管的关键参数，并进行了对比分析。此外，我们还进行了表面热流计算，探讨了不同进口条件下的热流传输情况。最后，我们对研究进展进行了总结，并对未来研究工作进行了展望。 【关键词】 乘波构型；表面热流；CFD；数值模拟；参数优化 【Abstract】 This paper presents the mid-term progress of the design of the shock-riding configuration and the calculation of surface heat flux. Firstly, we made the initial design of the shock-riding configuration and performed flow field analysis using CFD method. Then, we conducted a study on the calculation of shock-riding tube and surface heat flux. By numerical simulation, we obtained the key parameters of the shock-riding tube and made comparative analysis. Additionally, we also conducted surface heat flux calculations and investigated the heat transfer under different inlet conditions. Finally, we summarized the research progress and outlooked future research. 【Keywords】 Shock-riding configuration; Surface heat flux; CFD; Numerical simulation; Parameter optimization