cfm debris指南空客计划.pdfVIP

CFM56 Proprietary Information CFM, CFM56, LEAP and the CFM logo are s of CFM International, a 50/50 joint between Snecma (Safran group) and GE. The information in this is CFM Proprietary Information and is disclosed onfidence. It is the property of CFM International and its parent companies, and shall not be used, disclosed to others or reproduced without the express written consent of CFM. If consent is given for reproduction in whole or in part, this notice shall appear in any such reproduction in whole or in part. The information contained in this may also be controlled by the U.S. and French export control laws. Unauthorized export or re-export is prohibited. Table of contents 6 Introduction 8 Contact information 10 Handling, collection and inspection 15 Ma ic sensor fication 17 Scavenge screen fication 20 CFM MCD inspection guidelines 25 Debris identification 60 Definitions 66 Appendix Bearing cross-sections Turbine jet engine oil identification Scale Introduction This guide is intended exclusively for the owners and operators of CFM56 aero turbo machinery. It has been prepared as a guide for use in the ysis of debris collected from or generated by the lubrication system of these engines. The purpose of this guide is to enable quick and accurate identification of contaminates and debris material. The visual identification of debris is a valuable skill, but can not substitute for laboratory ysis to confirm material identification. The data presented here does not supersede or re ce any FAA approved s. This and the material within it are subordinate to Aircraft and Engine Maintenance