M07716_Clip_SGD_User_使用说明书手册_Oct17_Issue_1.pdfVIP

ClipSGD

PortablesingleGasDetector

Usermanual

M07716

Issue1

October2017

⚠WARNING

• Clip SGD is a hazardous area certified gas detector and as such must be operated and

maintained in strict accordance with the instructions, warnings and label information

included in the manual.

• Before operating this device, please read carefully and understand all instructions in the

manual.

• Understand the screen display and alarm warnings prior to use.

• Before use, please check the activation date, and if the activation date has expired please

do not use the device.

• Before use ensure that the device is in good condition and the enclosure, the display

window, alarm LED windows and sounder aperture are undamaged and clear from

contaminants.

• Before use perform the self-test of the LED’s, sounder and vibrator.

• Bump test the device regularly by applying a gas concentration exceeding the alarm set

point. It is recommended that a bump test is performed at least every 90 days.

• For the O2 detector perform a calibration every 30 days in a fresh air environment.

• If the device fails a bump test, calibration or self-test please do not use the device.

• Do not disassemble or substitute components, or operate beyond the intended range

of use as this may impair intrinsic safety, invalidate safety certification and will void the

warranty.

• Do not attempt to replace the battery or sensor as the Clip SGD is designed to be

maintenance free and disposable. Changing the battery or sensor may impair intrinsic

safety, invalidate safety certification and will void the warranty.

• Use IR communications only in a safe area that is free from hazardous gases

• To prevent the generation of static electricity do not clean or rub the LCD screen of the

device with a dry cloth or hands in a hazardous area environment

• Perform cleaning and maintenance o