【英语版】国际标准 ISO 5-2:2009 EN Photography and graphic technology — Density measurements — Part 2: Geometric conditions for transmittance density 摄影和制图技术 密度测定 第2部分:透射密度的几何条件.pdf
- 2
- 0
- 2024-07-09 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2009-11-20 颁布
以下文本介绍内容由我方AI生成,信息仅供参考,如有出入,请以实际为准。
ISO5-2:2009ENPhotographyandgraphictechnology—Densitymeasurements—Part2:Geometricconditionsfortransmittancedensity是国际标准化组织ISO于2009年发布的标准,它涉及到摄影和图形技术中的密度测量。这部分内容主要关注透射密度测量的几何条件。
我们需要明确密度测量的定义。密度是指物质在单位体积内的质量,而在摄影和图形技术中,密度测量通常用于评估图像的亮度和对比度。
ISO5-2:2009标准中,对透射密度测量的几何条件进行了详细的描述。这部分主要包括两个部分:设备和测量条件。
1.设备:用于密度测量的设备包括光源、透射片(图像)、反射器、密度计等。这些设备必须符合一定的精度和稳定性要求,以确保测量的准确性和可靠性。
2.测量条件:包括照明条件、反射器位置、透射片放置方式等。这些条件必须符合一定的几何关系,以确保测量的准确性。具体来说,光源必须均匀地照射到透射片上,反射器必须准确地反射光线的方向,而透射片的放置方式必须确保光线能够正确地穿过并被密度计接收。
ISO5-2:2009标准还对测量过程中的一些特殊情况进行了规定,例如透射片的位置变化、光源强度的变化等对测
您可能关注的文档
- 国际标准 ISO 5167-6:2022 EN 利用插入满流圆形截面导管中的压差装置测量流体流量 第6部分:楔形流量计 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters.pdf
- 国际标准 ISO 5167-6:2022 EN Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters 利用插入满流圆形截面导管中的压差装置测量流体流量 第6部分:楔形流量计.pdf
- 国际标准 ISO 5168:2005 EN 流体流量测量 不确定性评估程序 Measurement of fluid flow — Procedures for the evaluation of uncertainties.pdf
- 国际标准 ISO 5168:2005 EN Measurement of fluid flow — Procedures for the evaluation of uncertainties 流体流量测量 不确定性评估程序.pdf
- 国际标准 ISO 517:2008 EN 摄影 与摄影镜头有关的孔径和相关特性 名称和测量方法 Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements.pdf
- 国际标准 ISO 517:2008 EN Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements 摄影 与摄影镜头有关的孔径和相关特性 名称和测量方法.pdf
- 国际标准 ISO 5171:2019 EN 气焊设备 焊接、切割和相关工艺中使用的压力表 Gas welding equipment — Pressure gauges used in welding, cutting and allied processes.pdf
- 国际标准 ISO 5171:2019 EN Gas welding equipment — Pressure gauges used in welding, cutting and allied processes 气焊设备 焊接、切割和相关工艺中使用的压力表.pdf
- 国际标准 ISO 5172:2006 EN 气焊设备 用于气焊、加热和切割的吹管 规范和试验 Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests.pdf
- 国际标准 ISO 5172:2006 EN Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests 气焊设备 用于气焊、加热和切割的吹管 规范和试验.pdf
- 国际标准 ISO 520:2010 EN 谷物和豆类 千粒重的测定 Cereals and pulses — Determination of the mass of 1 000 grains.pdf
- 国际标准 ISO 520:2010 EN Cereals and pulses — Determination of the mass of 1 000 grains 谷物和豆类 千粒重的测定.pdf
- 国际标准 ISO 52000-1:2017 EN 建筑节能性能 总体 EPB 评估 第1部分:总体框架和程序 Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures.pdf
- 国际标准 ISO 52000-1:2017 EN Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures 建筑节能性能 总体 EPB 评估 第1部分:总体框架和程序.pdf
- 国际标准 ISO 52000-3:2023 EN 建筑节能性能 总体 EPB 评估 第3部分:确定和报告一次能源系数 (PEF) 和二氧化碳排放系数的一般原则 Energy performance of buildings — Overarching EPB assessment — Part 3: General principles for determination and reporting of primary energy factors (PEF) and CO2 emi.pdf
- 国际标准 ISO 52000-3:2023 EN Energy performance of buildings — Overarching EPB assessment — Part 3: General principles for determination and reporting of primary energy factors (PEF) and CO2 emission coefficients 建筑节能性能 总体 EPB 评估 第3部分:确定和报告一次能源系数 (P.pdf
- 国际标准 ISO 52003-1:2017 EN 建筑物的能源性能 指标、要求、等级和证书 第1部分:总体方面和对总体能源性能的应用 Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1: General aspects and application to the overall energy performance.pdf
- 国际标准 ISO 52003-1:2017 EN Energy performance of buildings — Indicators, requirements, ratings and certificates — Part 1: General aspects and application to the overall energy performance 建筑物的能源性能 指标、要求、等级和证书 第1部分:总体方面和对总体能源性能的应用.pdf
- 国际标准 ISO 5201:2024 EN 金融服务 — 代码扫描支付安全 Financial services — Code-scanning payment security.pdf
- 国际标准 ISO 5201:2024 EN Financial services — Code-scanning payment security 金融服务 — 代码扫描支付安全.pdf
最近下载
- JB_T 9147—2025 膜片联轴器(发布稿).docx VIP
- DBJ_T03-102-2018:市政基础设施工程资料管理规程(城镇供热管网工程、城镇燃气输配工程、园林绿化工程、城市道路照明工程).pdf VIP
- 广东实验中学2025-2026学年(上)高一年级中段模块考试化学试卷含答案.pdf VIP
- 钢结构墙面板施工安全要求.docx VIP
- 易电力监控系统技术说明第四篇高级功能.pdf VIP
- 易电力监控系统技术说明第三篇编辑配置.pdf VIP
- 统编版语文八年级上册第26课《诗词五首》(共59张PPT).pptx VIP
- 数理逻辑与集合论:5-1 谓词逻辑的等值和推理演算.ppt VIP
- 洪灏展望2027(下)更新.pdf VIP
- 数理逻辑与集合论(第2版)石纯一5-2 谓词逻辑的等值和推理演算1.pptx VIP
原创力文档

文档评论(0)