【英语版】国际标准 IEC 61249-4-17:2009 EN_D Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-g.pdf
- 4
- 0
- 2024-07-09 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2009-05-26 颁布
以下文本介绍内容由我方AI生成,信息仅供参考,如有出入,请以实际为准。
IEC61249-4-17:2009EN_D材料用于印刷板和其他连接结构-第4-17部分:预浸料材料部分规范集,未包覆(用于制造多层板)-无卤素、无卤素环氧树脂编织E-玻璃预浸料,其具有确定的易燃性(垂直燃烧测试)适用于无铅焊接组装。
IEC61249-4-17是国际电工委员会(IEC)关于印刷板和其他连接结构材料的标准系列的一部分,标准编号为2009年版本。这一部分主要是关于预浸料材料的部分规范集,特别是无包覆(用于制造多层板)的预浸料材料。其中特别提到了一种无卤素、无卤素环氧树脂编织E-玻璃预浸料,这种预浸料具有确定的易燃性,需要进行垂直燃烧测试。这种材料适用于无铅焊接组装。
需要注意的是,该标准涉及到材料的易燃性测试和生产工艺,需要符合相关法规和安全标准,以确保产品的质量和安全性能。在实际应用中,需要根据具体的产品设计和生产要求,选择合适的预浸料材料和生产工艺,并确保符合相关标准的要求。
您可能关注的文档
- 国际标准 IEC 61223-3-5:2019 EN-FR 医学影像部门中的评估和常规测试-第3-5部分:验收测试和稳定性测试-计算机断层扫描X射线设备的成像性能 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and and constancy tests - Imaging performance of computed tomography X-r.pdf
- 国际标准 IEC 61223-3-5:2019 EN-FR Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and and constancy tests - Imaging performance of computed tomography X-ray equipment 医学影像部门中的评估和常规测试-第3-5部分:验收测试和稳定性测试-计算机断层.pdf
- 国际标准 IEC 61223-3-6:2020 EN-FR 医学成像部门中的评估和常规测试 - 第3-6部分:验收和稳定性测试 - 在乳腺断层摄影操作模式中使用的乳腺X射线设备的成像性能 Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray eq.pdf
- 国际标准 IEC 61223-3-6:2020 EN-FR Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis mode of operation 医.pdf
- 国际标准 IEC 61223-3-7:2021 EN-FR 医疗成像部门中的评估和常规检测-第3-7部分:接收和稳定性测试-牙科锥形束CT设备的成像性能 Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam c.pdf
- 国际标准 IEC 61223-3-7:2021 EN-FR Evaluation and routine testing in medical imaging departments - Part 3-7: Acceptance and constancy tests - Imaging performance of X-ray equipment for dental cone beam computed tomography 医疗成像部门中的评估和常规检测-第3-7部分:接收和稳定.pdf
- 国际标准 IEC 61223-3-8:2024 EN-FR 医学影像部门中的评估和常规测试 - 第3-8部分:验收和稳定性测试 - 用于摄影和透视的X射线设备的成像性能 Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiograph.pdf
- 国际标准 IEC 61223-3-8:2024 EN-FR Evaluation and routine testing in medical imaging departments - Part 3-8: Acceptance and constancy tests - Imaging performance of X-ray equipment for radiography and radioscopy 医学影像部门中的评估和常规测试 - 第3-8部分:验收和稳定性测试 - 用于.pdf
- 国际标准 IEC 61224:1993 EN-FR 核反应堆 - 电阻温度探测器(RTD)的反应时间 - 原位测量 Nuclear reactors - Response time in resistance temperature detectors (RTD) - In situ measurements.pdf
- 国际标准 IEC 61224:1993 EN-FR Nuclear reactors - Response time in resistance temperature detectors (RTD) - In situ measurements 核反应堆 - 电阻温度探测器(RTD)的反应时间 - 原位测量.pdf
- 国际标准 IEC 61249-4-17:2009 EN-FR 印刷板和其他连接结构材料 - 第4-17部分:预制预浸料分部分规范集,未包覆(用于制造多层板) - 无卤素化合物的氧化亚胺编织E-玻璃预浸料具有确定的易燃性(垂直燃烧测试)用于无铅组装 Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg ma.pdf
- 国际标准 IEC 61249-4-17:2009 EN-FR Materials for printed boards and other interconnecting structures - Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-.pdf
- 国际标准 IEC 61249-4-18:2013 EN-FR 印刷板和其他连接结构用材料—第4-18部分:预浸料材料分部分规范集,未包覆(用于制造多层板)—用于无铅装配的高性能已固化环氧预浸料编织E-玻璃预浸料,具有规定的易燃性(垂直燃烧测试) Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg mat.pdf
- 国际标准 IEC 61249-4-18:2013 EN-FR Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E.pdf
- 国际标准 IEC 61249-4-19:2013 EN-FR 印刷板材料和其他连接结构材料-第4-19部分:预制预浸料非防护(用于制造多层板)的分类规范集-用于无铅装配的高性能无卤素环氧玻璃编织预浸料具有规定的易燃性(垂直燃烧测试)的预浸料 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg mater.pdf
- 国际标准 IEC 61249-4-19:2013 EN-FR Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated.pdf
- 国际标准 IEC 61249-4-2:2005 EN 印刷板和其他连接结构用材料-第4-2部分:预制预浸料部分规范集-无芯-定义易燃性的多功能环氧编织E-玻璃预浸料 Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide .pdf
- 国际标准 IEC 61249-4-2:2005 EN Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability 印刷板和其他连接结构.pdf
- 国际标准 IEC 61249-4-5:2005 EN 印刷板和其他连接结构用材料-第4-5部分:预制预浸料部分规范集,未包裹的-改性或未改性的聚酰亚胺,编织E-玻璃,定义可燃性的预制E-玻璃预浸料 Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimid.pdf
- 国际标准 IEC 61249-4-5:2005 EN Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability.pdf
原创力文档

文档评论(0)