- 2
- 0
- 2024-07-19 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2008-10-08 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO13943:2008EN《消防安全词汇》是关于消防安全相关的术语和定义的标准化规定。
详细解释如下:
本标准提供了消防安全相关术语的标准化词汇和定义,以促进在不同领域和不同组织之间的交流和理解。这些术语和定义涵盖了火灾预防、灭火、火灾探测和报警、人员疏散、消防设备和技术等多个方面。
以下是其中一些关键术语和定义的详细解释:
*火灾:在时间和空间上失去控制的燃烧。
*灭火器:用于扑灭火灾的便携式设备,通常包含干粉、泡沫或水等灭火剂。
*火灾探测器:用于检测火灾的设备,通常基于热敏、烟敏或气体检测技术。
*人员疏散:在火灾或其他紧急情况下,引导人员安全离开建筑物或场所的过程。
*消防通道:用于消防车或其他消防设备进入火场的道路。
*消防泵:用于加压输送灭火剂或消防水的设备。
*消防水龙带:连接消防栓和消防水枪的软管。
*消防楼梯:用于人员疏散的楼梯,通常具有防火保护。
本标准还涵盖了与消防安全相关的其他术语和定义,如消防设施、消防培训、消防安全评估等。这些术语和定义对于理解消防安全相关问题、制定相关政策和标准以及进行消防安全评估等方面都非常重要。
您可能关注的文档
- 国际标准 ISO 13919-1:2019 EN 电子和激光束焊接接头 缺陷质量等级要求和建议 第1部分:钢、镍、钛及其合金 Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys.pdf
- 国际标准 ISO 13919-1:2019 EN Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 1: Steel, nickel, titanium and their alloys 电子和激光束焊接接头 缺陷质量等级要求和建议 第1部分:钢、镍、钛及其合金.pdf
- 国际标准 ISO 13919-2:2021 EN 电子和激光束焊接接头 缺陷质量等级要求和建议 第2部分:铝、镁及其合金和纯铜 Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper.pdf
- 国际标准 ISO 13919-2:2021 EN Electron and laser-beam welded joints — Requirements and recommendations on quality levels for imperfections — Part 2: Aluminium, magnesium and their alloys and pure copper 电子和激光束焊接接头 缺陷质量等级要求和建议 第2部分:铝、镁及其合金和纯铜.pdf
- 国际标准 ISO 1392:1977 EN 结晶点的测定 一般方法 Determination of crystallizing point — General method.pdf
- 国际标准 ISO 1392:1977 EN Determination of crystallizing point — General method 结晶点的测定 一般方法.pdf
- 国际标准 ISO 13920:2023 EN 焊接 焊接结构的一般公差 长度和角度、形状和位置的尺寸 Welding — General tolerances for welded constructions — Dimensions for lengths and angles, shape and position.pdf
- 国际标准 ISO 13920:2023 EN Welding — General tolerances for welded constructions — Dimensions for lengths and angles, shape and position 焊接 焊接结构的一般公差 长度和角度、形状和位置的尺寸.pdf
- 国际标准 ISO 13921:2008 EN 航空航天 螺钉,100 度缩小沉头,内偏心十字形带肋或无肋驱动,普通柄,短或中长 MJ 螺纹,金属材料,有涂层或无涂层,强度等级小于或等于 1 100 兆帕 尺寸 Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium .pdf
- 国际标准 ISO 13921:2008 EN Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less th.pdf
- 国际标准 ISO 13943:2008 EN Fire safety - Vocabulary 火灾安全-词汇.pdf
- 国际标准 ISO 13943:2008 FR 火灾安全-词汇 Fire safety - Vocabulary.pdf
- 国际标准 ISO 13943:2008 FR Fire safety - Vocabulary 火灾安全-词汇.pdf
- 国际标准 ISO 13943:2023 EN 火灾安全——词汇 Fire safety — Vocabulary.pdf
- 国际标准 ISO 13943:2023 EN Fire safety — Vocabulary 火灾安全——词汇.pdf
- 国际标准 ISO 13944:2012 EN 润滑金属粉末混合物 确定润滑剂含量 索氏提取法 Lubricated metal-powder mixes — Determination of lubricant content — Soxhlet extraction method.pdf
- 国际标准 ISO 13944:2012 EN Lubricated metal-powder mixes — Determination of lubricant content — Soxhlet extraction method 润滑金属粉末混合物 确定润滑剂含量 索氏提取法.pdf
- 国际标准 ISO 13947:2011 EN 金属粉末 使用粉末锻造试样测定金属粉末中非金属夹杂物的测试方法 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen.pdf
- 国际标准 ISO 13947:2011 EN Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen 金属粉末 使用粉末锻造试样测定金属粉末中非金属夹杂物的测试方法.pdf
- 国际标准 ISO 13948-1:2015 EN 柴油发动机 燃油喷射泵和燃油喷射器低压接头 第1部分:螺纹接头 Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections.pdf
文档评论(0)