【英语版】国际标准 ISO 10304-4:1997 EN Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 4: Determination of chlorate, chloride and chlorite in water with low contamination 水质 利用离子液相色谱法测定溶解阴离子 第4部分:测定低污染水中的氯酸盐、氯化物和亚氯酸盐.pdf
- 2
- 0
- 2024-08-06 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1997-12-25 颁布
- 1、本标准文档预览图片由程序生成,具体信息以下载为准。
- 2、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 3、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 4、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO10304-4:1997EN水质-通过离子液液相色谱法测定溶解阴离子-第4部分:使用低污染性方法测定水中的氯酸盐、氯离子和次氯酸盐。
ISO10304-4是ISO10304系列标准的一部分,ISO10304是一系列关于水质分析的标准。本部分标准主要关注水中溶解阴离子的测定,特别是氯酸盐、氯离子和次氯酸盐的测定。
氯酸盐、氯离子和次氯酸盐都是水中的常见离子,它们在水中可能由于各种化学和生物过程产生。这些离子的准确测定对于了解水质,尤其是可能存在的污染物质非常重要。
本方法采用液相色谱法进行离子分析,通过特定的化学反应将离子转化为可测定的化合物,然后进行测定。这种方法具有低污染性,适用于大多数水质样本的测定。
具体操作步骤可能会因实际环境和水样性质的不同而有所调整,但大体上,需要采集水样、进行前处理(如去除悬浮物和干扰物质)、进行液相色谱分析、数据处理等步骤。
需要注意的是,虽然本方法被广泛认为是一种有效的测定方法,但它也可能受到一些因素的影响,如仪器性能、操作熟练程度、样品前处理的质量等。因此,在实际操作中,需要根据具体情况进行适当的调整和优化。
您可能关注的文档
- 国际标准 ISO 10298:2010 EN 测定气体或气体混合物的毒性 Determination of toxicity of a gas or gas mixture.pdf
- 国际标准 ISO 10298:2010 EN Determination of toxicity of a gas or gas mixture 测定气体或气体混合物的毒性.pdf
- 国际标准 ISO 10300-1:2001 EN 锥齿轮承载能力计算 第1部分:简介和一般影响因素 Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors.pdf
- 国际标准 ISO 10300-1:2001 EN Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors 锥齿轮承载能力计算 第1部分:简介和一般影响因素.pdf
- 国际标准 ISO 10300-1:2014 EN 锥齿轮承载能力计算 第1部分:简介和一般影响因素 Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors.pdf
- 国际标准 ISO 10300-1:2014 EN Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors 锥齿轮承载能力计算 第1部分:简介和一般影响因素.pdf
- 国际标准 ISO 10300-2:2001 EN 锥齿轮承载能力计算 第2部分:表面耐久性(点蚀)计算 Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting).pdf
- 国际标准 ISO 10300-2:2001 EN Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting) 锥齿轮承载能力计算 第2部分:表面耐久性(点蚀)计算.pdf
- 国际标准 ISO 10300-2:2014 EN 锥齿轮承载能力计算 第2部分:表面耐久性(点蚀)计算 Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting).pdf
- 国际标准 ISO 10300-2:2014 EN Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting) 锥齿轮承载能力计算 第2部分:表面耐久性(点蚀)计算.pdf
- 国际标准 ISO 10306:1993 EN 纺织品 棉纤维 气流法评估成熟度 Textiles — Cotton fibres — Evaluation of maturity by the air flow method.pdf
- 国际标准 ISO 10306:1993 EN Textiles — Cotton fibres — Evaluation of maturity by the air flow method 纺织品 棉纤维 气流法评估成熟度.pdf
- 国际标准 ISO 10307-1:1993 EN 石油产品 渣油中的总沉淀物 第1部分:热过滤法测定 Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration.pdf
- 国际标准 ISO 10307-1:1993 EN Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration 石油产品 渣油中的总沉淀物 第1部分:热过滤法测定.pdf
- 国际标准 ISO 10307-2:1993 EN 石油产品 渣油中的总沉淀物 第2部分:使用标准老化程序测定 Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing.pdf
- 国际标准 ISO 10307-2:1993 EN Petroleum products — Total sediment in residual fuel oils — Part 2: Determination using standard procedures for ageing 石油产品 渣油中的总沉淀物 第2部分:使用标准老化程序测定.pdf
- 国际标准 ISO 10308:1995 EN 金属涂层 孔隙率测试回顾 Metallic coatings — Review of porosity tests.pdf
- 国际标准 ISO 10308:1995 EN Metallic coatings — Review of porosity tests 金属涂层 孔隙率测试回顾.pdf
- 国际标准 ISO 10310:1995 EN 神经外科植入物 植入式神经刺激器的标记和包装 Neurosurgical implants — Marking and packaging of implantable neural stimulators.pdf
- 国际标准 ISO 10310:1995 EN Neurosurgical implants — Marking and packaging of implantable neural stimulators 神经外科植入物 植入式神经刺激器的标记和包装.pdf
文档评论(0)