WE910-20010110-六角和六角法兰螺母的尺寸要求-eng.pdf

WORLDWIDEFASTENERSTANDARDDate:2001-01-10

WE910DIMENSIONALREQUIREMENTSFORHEXAGONANDFLANGEDHEXAGONNUTS

1.SCOPE

Thisstandardgivesthegeneralanddimensionalrequirementsforhexagon(M4-M24),flanged

hexagon(M5-M20),andhexagonthinnuts(M4-M24).

NOTE:ThedimensionsspecifiedinTable1arenotsuitableforpropertyclasses9and12.The

requirementsforNutandWasherAssembliesarespecifiedinWE901.

2.REFERENCES

ISO261-Generalpurposemetricscrewthreads-Generalplan.

ISO965-Generalpurposemetricscrewthreads-Tolerances.

ISO1502-Generalpurposemetricscrewthreads-Gauging.

ISO1302-Technicaldrawings-methodofindicatingsurfaceroughness.

ISO4288-Rulesandproceduresforthemeasurementofsurfaceroughnessparametersusing

stylusinstruments.

WE901-Generalrequirementsfornutandwasherassemblies.

WX100-FinishSpecification

3.GENERALREQUIREMENTS

3.1DIMENSIONSANDTOLERANCES

Thedimensionsandtolerancesofhexagon,flangedhexagon,andhexagonthinnutsmust

beinaccordancewithClauses1-6,Tables1-4,andFigures1-3.

3.2GAUGING(REFEREEMETHOD)

Forrefereepurposes,dimensionse,Ta,mandcaresatisfiedifflangedhexagonnutsmeet

therequirementsforgaugingspecifiedintheAppendix.

4.SCREWTHREADS

4.1DIMENSIONSANDTOLERANCES

ScrewthreadsmustconformtothedimensionsandtolerancesspecifiedinISO261and

ISO965threadtoleranceclass6H.

4.2GAUGING