氢气干燥器绝热性能影响因素分析.pdfVIP

第54卷第4期石油化工设备Vol.54No.4

2025年7月PETRO-CHEMICALEQUIPMENTJuly2025

文章编号：1000-7466(2025)04-0015-09

氢气干燥器绝热性能影响因素分析

蔡智昱，董金善，任晴晴

(南京工业大学机械与动力工程学院，江苏南京211816)

摘要：以氢气干燥器为研究对象，通过正交试验设计，选取Lg（33）正交表，结合方差与极差

分析，研究各参数对热量损失的影响显著性，结果表明，保温层厚度S、保温层材料W对热量损

失Q影响显著，工作温度t对热量损失影响不显著，显著性排列由大到小依此为：W、、t。各

因素对热量损失影响的最佳方案为S（3）W（1）t(3）。设备保温材料选用硅酸铝纤维毡，保温

层厚度选用50mm，工作温度5℃工况下，按最大允许热损失量考虑，绝热性能设计满足规范

要求。

关键词：氢气干燥器；绝热性能；数值模拟；正交试验

中图分类号：TQ051.8文献标志码：Adoi:10.3969/j.issn.1000-7466.2025.04.003

AnalysisofInfluencingFactorsforThermalInsulationPerformanceof

HydrogenDryer

CAIZhiyu,DONGJinshan,RENQingqing

(SchoolofMechanicalandPowerEngineering,NanjingTechUniversity,Nanjing211816,China)

Abstract:Thehydrogendryerwasstudied,andtheL,(3)orthogonaltablewasselectedthroughanorthogonal

testdesign.Accordingtovarianceandrangeanalysis,thesignificanceoftheinfluenceofvariousparameterson

heatlosswasanalyzed.TheresultsshowthattheinsulationlayerthicknessSandinsulationlayermaterialW

haveasignificantimpactonheatlossQ,whiletheinfluenceofambienttemperaturetonheatlossisslight.The

significanceofthesefactorsindescendingorderisW,8,t.Theoptimalsolutionfortheimpactofvarious

factorsonheatlossis(3)W(I)t(3).Aluminumsilicatefiberfeltisselectedastheinsulationmaterial,withan

insulationlayerthicknessof50mmandanambienttemperatureof5°C.Inviewofthemaximumallowable

heatloss,thethermalinsulationperformancedesignmeetstherequirementsofrelevantspecifications.

Keywords:hydrogendryer;thermalinsalationpe