SNC815重载齿条渗碳淬火变形分析.pdfVIP

HotWorkingTechnology2021,Vol.50,No.8

SNC815重载齿条渗碳淬火变形分析

王鑫\杜林芳2,张驰\刘波1

(1.河南工程学院机械工程学院，河南郑州451191;2.河南机电职业学院机械工程学院，河南郑州451191)

摘要：针对传统方法解决齿条变形耗时耗力的现状，以某SNC815重载齿条为研究对象，运用现代有限元分析方

法，对其渗碳后油淬过程的温度和相变结果进行了分析，找出该齿条的变形原因和规律。结果表明，通过调整淬火温度

和油温、在合适区域加载配重的方法，能使齿条的变形情况得到较大改善。相比于初始工艺，齿条整体凸起量减少了

0.328mm，齿宽凹陷量减少了0.26mm。

关键词：相变；变形；淬火；配重

DOI:10.14158/j.cnki.1001-3814.

中图分类号：TG162.73文献标识码：A文章编号：1001-3814(2021)8-0130-04

AnalysisofCarburizingandQuenchingDeformation

onHeavyLoadRackMadeofSNC815

WANGXin1,DULinfang2,ZHANGChi1,LIUBo1

(1.CollegeofMechanicalEngineering,HenanUniversityofEngineering,Zhengzhou451191,China;2.Collegeof

MechanicalEngineering,HenanMechanicalandElectricalVocationalCollege,Zhengzhou451191,China)

AbstractAimingatthecurrentsituationthatthetraditionalmethodtosolverackdeformationwastime-consumingand：

labor-consuming,aheavyloadrackmadeofSNC815wastakenastheresearchobject,thetemperatureandphasechange

resultsofoilquenchingprocessaftercarburizationwereanalyzedbyusingmodemfiniteelementanalysismethod,andthe

causesandlawsofdeformationoftherackwerefoundout.Theresultsshowthat,thedeformationoftherackcanbegreatly

improvedbyadjustingthequenchingtemperatureandoiltemperatureandloadingthecounterweightintheappropriatearea.

Comparedwiththeinitialprocess,theoverallprotrudingamountoftheracki