疏浚船用高强高韧铸造锁圈的热处理工艺研究.pdfVIP

2024年第53卷第13期热加工工艺ISSN1001-3814

Vol.53No.132024HotWorkingTechnologyCN61-1133/TG

DOI:10.14158/j.cnki.1001-3814.

http://www.rjrjggy@

疏浚船用高强高韧铸造锁圈的热处理工艺研究

李祖磊,薛冰,李兆森,于从潇,申发磊,管浩,殷凤仕

(山东理工大学机械工程学院,山东淄博255000)

摘要锁圈用于疏浚船管道对接是管道接口处的关键部件其承受较大的载荷对材料的强韧性要求高遥对一种

疏浚船用高强高韧铸造锁圈用钢进行了处理工艺研究遥结果表明院在淬火温度890℃时随回火温度的升高试验钢

的强度降低断后伸长率升高遥经890℃水淬尧620℃回火后的组织为回火马氏体硬度和冲击功分别为34HRC和29J

材料强韧性配合较好遥

关键词疏浚船曰锁圈曰处理曰高强高韧

中图分类号TG161文献标识码A文章编号1001-3814(2024)13-0105-03

ResearchonHeatTreatmentTechnologyofHighStrengthandHighToughness

CastingLockRingforDredgingShip

LIZulei,XUEBing,LIZhaosen,YUCongxiao,SHENFalei,GUANHao,YINFengshi

(SchoolofMechanicalEngineering,ShandongUniversityofTechnology,Zibo255000,China)

Abstract院Thelockringisthekeycomponentatthepipelineinterfaceofdredgingship,whichbearsalargeloadand

requireshighstrengthandtoughnessofthematerial.Theheattreatmenttechnologyofakindofsteelforhighstrengthand

hightoughnesscastinglockringfordredgedmarinewasstudied.Theresultsshowthatwhenthequenchingtemperatureis890℃,

thestrengthoftheteststeeldecreasesandtheelongationafterbreakincreaseswiththeincreaseoftemperingtemperature.

Afterwaterquenchingat890℃andtemperingat620℃,themicrostructureistemperedmartensite,andthehardnessand

impactworkare34HRCand29J,respectively,thestrengthan