表面微弧氧化处理对球拍钛合金摩擦磨损性能的影响.docxVIP

《热加工工艺》2019年12月第48卷第24期

表面微弧氧化处理对球拍钛合金摩擦磨损性能的影响

杨力1,王胜2

(1.西南财经大学天府学院,四川绵阳621000;2.成都理工大学,四川成都610059)

摘要：在TA1、TC10和TC4钛合金基材表面制备了微弧氧化膜层，研究了三种不同微弧氧化膜层的显微组织、表面粗糙度、硬度、磨损失重和摩擦磨损形貌。结果表明：在相同微弧氧化工艺下，TA1、TC10和TC4钛合金表面形成了形貌不同的微弧氧化膜层；经过微弧氧化处理后，TA1和TC10表面膜层的磨损失重都要小于基材，而TC4合金表面膜层的磨损失重要略高于基材；TC10合金表面膜层的磨损失重最小，具有最佳的抵抗摩擦磨损的特性；钛合金基材的磨损机制主要为粘着磨损和局部剥落；而三种微弧氧化膜层的磨损机制为粘着磨损，摩擦磨损形貌的观察结果与磨

损失重测试结果较为吻合。关键词：微弧氧化；钛合金；膜层；形貌；摩擦磨损DOI:10.14158/j.cnki.1001-3814.2019.24.025

中图分类号：TG146.2；TG174.4 文献标识码：A 文章编号：1001-3814(2019)24-0107-04

EffectofSurfaceMicroArcOxidationTreatmentonFrictionandWearPropertiesofRacketTitaniumAlloyYANGLi1,WANGSheng2

(1.TianFuCollegeofSouthwesternUniversityofFinanceandEconomics,Sichuan621000,China;2.ChengduUniversityofTechnology,Sichuan610059,China)

Abstract：ThemicroarcoxidationcoatingswerepreparedonthesurfaceofTA1,TC10andTC4titaniumalloysubstrate.Themicrostructure,surfaceroughness,hardness,wearmasslossandfrictionandwearmorphologiesofthreekindsofmicroarcoxidationcoatingswereinvestigated.Theresultsshowthatunderthesamemicroarcoxidationprocess,themicroarcoxidationcoatingswithdifferentmorphologiesappearonthesurfaceofTA1,TC10andTC4titaniumalloy.Aftermicroarcoxidationtreatment,thewearmasslossofTA1andTC10surfacelayerarelessthanthatofthesubstrate,andthewearmasslossofthesurfacelayeronTC4alloyisslightlyhigherthanthatofthesubstrate.ThewearmasslossofthesurfacefilmlayerofTC10alloyisthesmallest,andithasthebestresistancetofrictionandwear.Thewearmechanismoftitaniumalloysubstrateismainlyadhesivewearandlocalpeeling.Thewearmechanismsofthreekindsofmicroarcoxidationcoatingsareadhesivewear.Theobservedresultsoffrictionandwearmorphologyareingoodagreementwiththeresultsofwearmasslosstest.

Keywords：microarcoxidation;titan