钢结构焊接专项施工方案实用指南.pdfVIP

钢结构焊接专项方案

Chapter1Generalns

光机坡口表面mm范围内的油漆锈垢毛刺镀锌层等杂物清除干净且不得有裂纹夹层等缺陷焊口组对应按设计图纸的要求进行在焊接环境出现风速大于ms下雨下雪大雾空气相对湿度大于或焊件温度低于时必须采用棚布遮挡加热等措施否则禁止施焊预热的加热区域应在焊接坡

1.1Purposeofn

XXXwelding。effectivelysuperviseandcontrolthen

processandqualityofsteelstructurewelding。ensurethequality

oftheproject。andbasedonthedesigndrawingsprovidedbythe

designinstitute。XXXinthecompany。combinedwiththeactual

ecleaningXXXliningplateXXXXXXplateXXXnweldingnduringtheprocessWeld