高速数字摄影应用于流化床内颗粒旋转特性的测试.pdf

25 卷 17 期 中 国 电 机 工 程 学 报 Vol.25 No.17 Sep. 2005 2005 年9 月 Proceedings of the CSEE 2005 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2005) 17-0072-06 中图分类号：TK 121 文献标识码：A 学科分类号：47020 高速数字摄影应用于流化床内颗粒旋转特性的测试 吴学成, 王勤辉, 骆仲泱, 高 琼, 方梦祥, 岑可法 (浙江大学热能工程研究所能源清洁利用与环境工程教育部重点实验室, 浙江省 杭州市，310027) MEASUREMENT OF PARTICLE ROTATION IN CFB RISER WITH HIGH-SPEED DIGITAL VIDEO CAMERA TECHNIQUE WU Xue-cheng, WANG Qin-hui, LUO Zhong-yang, GAO Qiong, FANG Meng-xiang, CEN Ke-fa (Clean Energy and Environment Engineering Key Lab of MOE, Institute for Thermal Power Engineering, Zheji ang University, Hangzhou 310027, Zheji ang Province, China) ABSTRACT: Particle rotation in a cold CFB riser with a V ＝3.5m/s 时，测得450~850 μm 透明玻璃珠在布风板以上 g dimension of 200mm×200mm×4m (H) was visualized by using 0.98m 的过渡区域内的平均旋转速度约为280r/s 。 an advanced measurement system composed of a high-speed 关键词 热能动力工程；高速数字摄影；循环流化床；气固 digital video camera and a high-power laser. Those particles 两相流；颗粒旋转 with special speckles or irregular shapes provide the possibility for determination of their rotational speeds. To enlarge 1 引言 measurement range of particle rotational speed, a dual- 循环流化床内固相颗粒运动特性的研究对于 frequency imaging method was presented, with mathematical analysis and proving experiment. The results show that this 揭示床内气固两相流机理