- 18
- 0
- 约 2页
- 2017-09-30 发布于福建
- 举报
O . I. Automation
2006 25 1 Measurement and Control Technique2006, Vol. 25, No. 1
100615762006
AVR CPLD
58 621000
CPLD CPLD
AVR 14
AVR AVR
CPLD
TP274.5 B
Application of AVR MCU and CPLD in Frequency Measurement Circuit
ZHU Song-bai, LIU Zhen-yu, ZHU Ying
(Dept. of Armament Products, NO.58 Research Institute of China Ordnance Industry, Mianyang 621000, China)
Abstract:An independent work mode was used in the system MCU and CPLD hardware interface in a frequency
measurement circuit . After the sy stem was powered on and reset, CPLD received the being measured frequency signal
which, and the signal was handled was converted into the time data by the inner pulse counter module of the CPLD. Then,
the time data wa s sent to the AVR MCU via the fourteen ports between the CPLD and the AVR MCU. The time data was
stored and computed by the AVR MCU, and then was sent it to nixie tube. So the dynamic scan display was finished.
Keywords: MCU; CPLD; Frequency measurement circuit
1 CPLD
CPLD
SignIN
CPLD
CPLD
AVR 14
AVR AVR
CPLD
AVR CPLD
LED
3.1
2
5V
1
0. 1uF +5V
N N f
x x s
原创力文档

文档评论(0)