变形搭接网络技术用于机械运动方案的创新设计.pdfVIP

26 4 Vo.l 26 No. 4 2010 8 M achine Design and Research Aug. , 2010 文章编号: 2010) 0400 05 , , (上海交通大学 机械与动力工程学院, 上海 200030, Email: qhliang@ sjtu. edu. cn) : 设计不仅是计算, 更重要的是构思, 是创新但最终创新必须具备一定的可计算性, 才能成为一 种方 , 为广大设计者所应用论文从可计算性角度对计算机辅助创新设计方 研究现状进行综合分析, 并从 可计算性和系统创新两 个角度分析了机械产品概念设计过程建模方 , 深入研究一种能够在系统层次实现机 械运动系统创新的设计模型- 基于变形搭接网络技术的行为结构建模方 该模型不仅可以表达功能行为 结构层次的分层次映射结构模型, 而且可以描述功能关系行为关系以及结构关系; 同时网络图的可计算特性 使得模型具有很好的可计算性, 为在行为结构层次进行机构系统计算机辅助创新提供了新的思路; 应用实例验 证了模型的有效性, 并给出了有待解决的若干关键技术 : ; ; ; : TH 11 : A Research on Creative Design ofM echanism System Using VariantnetworkM odelingM ethod LIANG Q inghua, ZOU Hu ijun, MO Jinqiu ( School ofM echanical Engineering, ShanghaiJ iao Tong University, Shanghai 200030, China) Abstract: Design is not only calculations, but configurations and creations. H owever a design theory orm ethod shou ld be calculable in order to be accepted and app lied as a general tool formost des igners. A novel conceptual design m odel based on variantnetwork modelingm ethod is dicussed in th ispaper tom eet both the calculability and the system atic creativity of conceptual mechan ism design. The m ethod has tw o advantages. The first is that it can describe the functiona,l behavioral and structural relationsh ips, as well as the m app ing procedures as functionbehaviorstructure which isw idely accepted in the field of conceptualm echan ism design. The second is that it can be easily expressed m athem atically and be programm edw ith compu ter language due to the calcu lable nature of network modeling method. After illustrating its feasib ility by exam ples, some key technologies are put forw ard for further rese