毕业论文--基于PLC的机械手模型控制系统的设计.doc

PAGE  PAGE 47 池州职业技术学院 专科生毕业论文（设计） 题 目： 基于PLC的机械手模型控制系统的设计 姓 名： 王发庆 学 院： 池州职业技术学院 专 业： 机电一体化 班 级： 2008.2 学 号： 0320030226 指导教师： 李胜多 完成时间： 2010.6.18 2007年6月18日 基于PLC的机械手模型控制系统的设计 摘 要 在工业生产和其他领域内，由于工作的需要，人们经常受到高温、腐蚀及有毒气体等因素的危害，增加了工人的劳动强度，甚至于危及生命。自从机械手问世以来，相应的各种难题迎刃而解。 在本设计中介绍了国内外机械手研究现状及PLC的研究发展趋势，描述了机械手控制系统的工作原理和动作实现过程。研究了基于PLC的机械手模型控制系统的设计，还研究了MCGS在机械手控制系统中的应用。利用组态软件MCGS设计了机械手模型控制系统监控界面，提供了较为直观、清晰、准确的机械手运行状态，进而为维修和故障诊断提供了多方面的可能性，充分提高了系统的工作效率。 关键词：机械手；PLC；MCGS Design of Manipulator Model Control System based on PLC Abstract In industrial production and other domains, Because of the demands of the work, people were usually subjected to endanger of heat, decay and poisonous air etc. factor, these factors increased the strength of workers labor, even endanger life. Since the manipulator was born, the various difficult problems were easily solved. In this design the present condition of research about domestic and international manipulator and development trend of research concerning PLC were introduced. The principle of work and the process of action’s realization of manipulator control system were described. The design of manipulator model control system based on PLC was researched and MCGS’s application in the manipulator model control system was researched. The interface of supervision for the manipulator model control system was designed by MCGS. An intuitive, clear and accurate manipulator operating state was provided. And then various possibilities for maintain and breakdown??s diagnosis were provided, the work’s efficiency of system was fully elevated. Key words: manipulator; PLC; MCGS 目 录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc169169246 摘 要 Ⅰ  HYPERLINK \l _Toc169169247 Abstract Ⅱ  HYPERLINK \l _Toc169169248 第一章 绪 论  PAGEREF _Toc169169248 \h 1