毕业设计：轨道电路的应用与维护探讨（终稿）.docVIP

摘 要 轨道电路以一段的为导体构成的电路，用于自动、连续检测这段线路是否被机车车辆占用，也用于控制信号装置或转辙装置，以保证行车安全的设备。 整个轨道系统路网依适当距离区分成许多闭塞区间，各闭塞区间以轨道绝缘接头区隔，形成一独立轨道电路，各区间的起始点皆设有号志机(色灯式号志)，当列车进入闭塞区间后，轨道电路立即反应，并传达本区间已有列车通行，禁止其他列车进入的讯息至号志机，此时位于区间入口的号志机，立即显示险阻禁行的信息。 Abstract Track circuit a railway line to the rail of the circuit for a conductor, is used in the automaticand continuous detection this period of line is occupied by locomotive vehicles, but also tocontrol signal devices or to correct device, to ensure the safety of the equipment. The railsystem in accordance with the appropriate distance network divided into many block interval, each block interval to track the insulation joint segregation, form a separate track circuit, each interval is the starting point of a] light machine (color lamp type] light), when the trains into block after the interval, track circuit react instantly, and pass this interval for train routes, and by other trains into message to] light machine, located in the entrance of the interval at] light machine, show immediate dangers of drink-drivinginformation. This thesis mainly describes the composition of the hardware of track circuit, the role of track circuit, the classification of track circuit, the application in railway track circuit, industrial frequency exchange successive track circuit, turnout section of track circuit, the polarity of the track circuit and cross section of the insulation rail set, 25 HZ track circuit, type 97 phase sensitive track circuit, frequency shift track circuit, the basic work of track circuit state and basic parameters, the maintenance of track circuit and the discussion. Through this design, preliminary master track circuit application principle, fault handling procedures, methods, contents, the direction of improving technology. Key words track circuit; 25 HZ; Turnout section, Maintenance improved. 目 录 第1章 绪 论 1 第2章 轨道电路概述 2 2.1 作用与构成 2 2.2 轨道电路的原理 2 2.3 轨道电路的分类 2 2.4 工作状态 2 第3章 25HZ轨道电路 4 3.1 25HZ轨道电路概述 4 3.1.1 基本组成 4 3.1.2 特点 4 3.1