毕业设计（论文）--中学教师办公楼钢筋混凝土框架结构设计.doc

摘要 该办公楼位于西安市蓝田县.办公类型：三层，宽14.4m，总高度11.4m。田家炳中学办公楼设计为三层钢筋混凝土框架结构办公楼，分为建筑设计和结构设计两部分。建筑设计是在总体规划的前提下，根据设计任务书的要求，采用PKPM软件设计结构，综合考虑使用功能、施工、材料、建筑设备、建筑艺术及经济等。在建筑选型方面，采用“一”字型布置。 在完成结构部分的计算之后，依据建筑方案和结构设计计算结果完成结构部分的施工图设计。本方案为一栋中学教师办公楼，主体为三层的钢筋混凝土框架结构。结构设计中主要是框架设计阶段，首先必须满足水平地震力作用下的框架侧移验算的要求，其次就是要满足风荷载作用下的框架侧移验算的要求，在进行地震水平作用计算时采用了底部剪力法，并运用弯矩二次分配法对框架进行内力计算。 关键词：钢筋混凝土框架结构（PKPM）；抗震设计；内力组合； Abstract Xian TianJiaBing middle school office building Abstract: the office is located in xian city LanTianXian. Office type: three-story frame structure. Office chief 50.4 m, width 14.4 m, total height of 11.4 m. TianGuBing middle school for three layer office design of reinforced concrete frame structure office buildings, divided into building design and structure design two parts. Architectural design is the premise of the overall plan, according to the requirements of the design plan descriptions, using PKPM software design structure, comprehensive consideration of the use function, construction, materials, construction equipment, construction art and economy etc. In building the selection of a word decorate. Upon completion of the structural part calculation according to the building scheme after completion and structural design calculation results of construction design structural parts. This scheme is a middle school teacher for building, subject three levels of reinforced concrete frame structure. Structure design is mainly framework design phase, first must satisfy the horizontal seismic forces moved the demand side calculating framework is to meet, then the wind load requirements of lateral move checking framework, earthquake level role in the bottom shear calculated, and the method of using secondary distribution method framework moment internal force calculation. Keywords: reinforced concrete frame structure (PKPM); Seismic design; Internal force combination; 目录 摘要 - 1 - Abstract - 2 - 目录 - 3 - 第一章 绪论 - 5 - 第二章 PKPM的认识 - 7 - 2.l PKPM的概况 - 7 - 2.2 结构平面计算机辅助设计软件 ( PMCAD ) - 12 - 2.3