毕业设计：电子语音报温杯毕业论文（终稿）.doc

密级： 公开 NANCHANG UNIVERSITY 学 士 学 位 论 文 THESIS OF BACHELOR （2006—2010年） 题 目 电子语音报温杯 学 院： 信息工程 系 电子信息工程 专业班级： 电子0 班 学生姓名： 学号： 6102106 指导教师： 职称： 讲 师 起讫日期： 2010.3. 7-2010.6.5 电子语音报温杯 摘 要 随着人们生活水平的提高，各种家用电热水器、电饭锅、煮奶器、电热杯等大量地进入人们的生活之中，而且随着技术的不断进步，这些产品的智能化水平也不断地提高，给人们的生活带来了越来越多的方便。为了在日常生活中，使人们能够在正常饮用温度条件下饮用各种饮品。本设计通过温度传感器与语音集成电路的有效设计，达到能够以语音提示人们杯中液体的温度。 本次设计通过DS18B2O温度传感器测量水温，采用AT89S52单片机利用C语言编程将DS18B20采集到的温度数据进行分段处理，来控制语音录音播报电路ISD1420,以选择播放的语音并辅以LCD液晶显示温度。ISD1420必须先进行声音录制以便于使用者对温度进行识别，例如当温度在70°C以上时播放“太烫了”，温度在30°C到70°C之间时播放“温度正好”，温度在30°C以下时播放“太凉了”。 关键词：DS18B20 ；AT89S52 ；LCDISD1420  Electronic Voice temperature cup Abstract With the improvement of living standard, various home appliances have been used in a lot of peoples lives: electric water heaters, electric cookers, boiling milk, electrothermal cup, and as technology advances, the intelligence level of these products have improved,making peoples lives more and more convenience. In order to make sure people can drink a variety of beverages in the normal temperature conditions in daily life. I have the design which used the effective design of temperature sensor and voice integrated circuits,producing the voice to prompts people the temperature of the liquid. This design used DS18B20 temperature sensor to measure temperature of water,using C language to program. The design used AT89S52 microcontroller to processing section of temperature data collected by DS18B20 , and it could control the audio recording broadcast circuits ISD1420 which used to choose voice to played. The LCD liquid crystal to display temperature data. ISD1420 must be used to record voice first to make the user identify the temperature, for example, when the temperature is above 70 ° C ,the system will play too hot, when the temperature is at 30 °C to 70 °C ,it will play temperatur