钢筋混凝土拱桥悬臂浇注施工模型试验研究.pdfVIP

西南交通大学学报 Vol. 42 No.5 第42 卷第5 期 2∞7 年 10 月 JOURNAL OF SOUTHWEST JIAOTONG UNIVERSITY Oct. 2007 文章编号:0258-2724 ( 2∞7) 05-0526-05 钢筋混凝土拱桥悬臂浇注施工模型试验研究 李晓斌 杨永清 蒲黔辉 刘祖胜2 (1.西南交通大学土木工程学院，四川成都 61∞131; 2. 四川省交通厅公路规划勘察设计研究院，四川成都 610041 ) 摘 要:为验证钢筋混凝土拱桥悬臂浇注施工工艺的可行性和安全性，以自沙沟 1.大桥为工程背景，进行了悬臂 浇注施工全过程模型试验;测试了拱圈变形、控制断面应力和扣索索力，并与有限元法计算结果进行了比较，二 者基本相符.结果表明，拱困在施工过程中是安全的，钢筋混凝土拱桥悬臂浇注施工工艺可行. 关键词:钢筋棍凝土拱桥;悬臂浇注;索力优化;模型试验 中图分类号:U445. 466; U448.34 文献标识码:A Model Test of Cantilever Casting Construction of Reinforced Concrete Arch Bridge U Xiaobin 1 , YANG Yongqini , PU Qianhui1 , UU Zwheni (1. School of Civil Eng. , Southwest Jiaotong University , Chengdu 61∞31 ， China; 2. Sichuan pro飞rince CornmUI让ω，tion Department Highway Pl缸ming ， Survey , Design and Researoh Institute , Chengdu 61α41 ， China) Abstract: In order to demonstrate the feasibility of the construction technique of cantilever casting of a reinforced concrete arch bridge and the rationality of cable force adjustment and construction control , a model test of cantilever c田ting construction was made by taking the No. 1 Baishagou bridge 田 project background. The displacement of model arch , the stress of control sections and the force of cables were tested. In addition ，也e test results were compared with calculated results based on 出è FEM (finite element method) , showing reasonable agreement. The research results show 出at 由e mddel arch is safe during the construction , the construction technique of cantilever casting of reinforced concrete arch bridges is feasible , and the method of cable force opti