石油工程测井-电阻率3.pptVIP

Directed by Liu Hongqi Copyright reserved. * 计算 已知：m=n=2，a=b=1，Rw=0.01欧姆米， POR=16%。读出P17，Fig-14，LLD曲线的电阻率值，作为RT，然后计算So判断是油层或水层或油水同层? 如何从曲线上读数据？？？ Directed by Liu Hongqi Copyright reserved. * Ch1 电法测井 §1.1 SP测井 Directed by Liu Hongqi Copyright reserved. * Curve scale a common problem to logging curves is providing a scale that can be read accurately over the full range of response. For most logs have small range, such as GR, from 10 to 250API, and AC, from 40 to 140 us/ft(100-400us/m), DEN from 1.8 to 3.2 g/cm3, but resistivity of rocks vary widely, from 0.2 to 2000000, even higher. linear scale is not suitable for this case, logarithm scale was employed. To look at the next page: Ch1 电法测井 §1.2 电阻率测井 Directed by Liu Hongqi Copyright reserved. * Ch1 电法测井 §1.2 电阻率测井 Directed by Liu Hongqi Copyright reserved. * 学会从下面的图上读电阻率的值 幅度差 Directed by Liu Hongqi Copyright reserved. * 什么是电极系 A 0.025 M1 0.025 M2 Spring弹簧 instrument A M1 M2 wireline 电极系 Directed by Liu Hongqi Copyright reserved. * Main contents of this class 1. Dual lateral logging principle 2. How does DLL tool realize current focused ? 3. The characteristics of DLL curves, for oil, gas, or water 4. Application of DLL data 5. Why did we need developed the microspherically the focused tool ? 6. The principle of MSFL and its application 7. In which condition, we need use DIL 8. The process of Secondary induce EMF generation 9. Application of DIL Directed by Liu Hongqi Copyright reserved. * Focused Logging Ch1 电法测井 §1.2 电阻率测井 Directed by Liu Hongqi Copyright reserved. * Focused Logging Figure 1-13 shows a typical focused tool, with bucking electrodes A 1 and A2 generating a current field (solid lines on a constant potential Vo) which focuses the current from the alpha ring (dotted lines). Alpha ring current penetrates deeply into the formation before the focusing fields become weak enough to allow it to disperse and return to the pickup electrode. Ch1 电法测井 §1