博海图书馆设计.doc

摘 要 本毕业设计是，该的总建筑面积大约是 平方米，共4层，建筑高度为米。本建筑采用钢筋混凝土现浇框架结构体系，包括建筑设计和结构设计两部分内容。 建筑设计是在总体规划的前提下，根据设计任务书的要求，综合考虑基地环境、使用功能、综合选型、施工、材料、建筑设备、建筑艺术及经济等。着重解决了建筑物与周围环境、建筑物与各种细部构造，最终确定设计方案，画出建筑施工图。 结构设计包括手算和电算两部分。其中手算部分的主要内容为设计的总说明、构件尺寸的初步确定、框架的计算简图、荷载计算、框架横向侧移计算、框架在水平及竖向荷载作用下的内力计算分析和计算、内力组合、截面设计及基础设计电算用P软件进行：框架结构内力组合截面设计Abstract The graduation design topic is bo sea library, the library of design a total construction area of about 5841.07 square meters, total 4 layer, the height of17.4 meters. This building USES cast-in-situ reinforced concrete frame structure system, including the building design and structure design two parts. The building design is in under the premise of general planning, according to the requirements of the design plan descriptions, considering the base environment, use function, comprehensive selection, construction, materials, construction equipment, construction art and economy. Emphatically resolve the building and the surrounding environment, buildings and all sorts of detail structure, final design, draw the building construction drawings. Structure design including the hand count and available in two parts. Among them is the main content of the hand part for the total design that the size of the component, sure, the calculation of preliminary frame diagram, the load calculation, frame transverse lateral calculation, framework in horizontal and vertical load calculation of internal force analysis and calculation, internal force combination, section design and basic design; Some applications available PKPM drawing software, including: structure layout, board of reinforcement LiangPingFa construction drawing, column chart, flat floor plan and construction drawing method, basic detail. Keywords: frame structure; internal force combination; section design; stair design; the foundation design 目 录 摘 要 I Abstract II 前 言 1 第1章 建筑设计说明 2 1.1 工程名称 2 1.2 工程概况 2 1.3 设计依据 2 1.4 设计基础材料 2 1.4.1 气温 2 1.4.2 风向 2 1.4.3 降雨量 2 1.4.4 冬雨季施工 2 1.4.5 工程地质条件及地理条件 2 1