DFMEA------失效模式与后.pptxVIP

  • 27
  • 0
  • 约 37页
  • 2017-09-22 发布于河南
  • 举报
DFMEA------失效模式与后果分析(Design Failure Mode Effect Analysis)Marian(Shenzhen)Co.,Ltd编制 :曹喜元 Formation By: Jack Cao 日期: Date: 1-Feb-2013主要内容Main content1.DFMEA 介绍4.DFMEA 关键参数DFMEA Presentation DFMEA Key Parameter2.DFMEA 职责5.DFMEA 表单填写说明DFMEAResponsibility DFMEA Form Filling Explanation3.DFMEA 制作流程6.DFMEA 案例DFMEA Make Process DFMEA Example一、DFMEA 的介绍DFMEA Presentation DFMEA 是FMEA 中的一种,FMEA分为:DFMEA 和PFMEADFMEA is in the FMEA one type, FMEA Contain :DFMEA PFMEADFMEA 是由负责设计的工程师或小组,在产品设计阶段尽可能的范围内预估产品在设计上可能发生的缺点.DFMEA is Engineer or group to responsible scheme, As far as possible within the scope of the estimated product design on the possible faults in the product design stage.PFMEA 是由负责制造装配的工程师或小组,预估产品在生产过程阶段或之前可能会发生的缺点.PFMEA is PE or group to responsible scheme , As far as possible the estimated product possible faults in the productive process or before.本章节重点讲述DFMEAThis chapter focuses on DFMEA.DFMEA 的形成DFMEA FormationDFMEA 是由负责设计的工程师或小组,在尽可能的范围内预估产品在设计上可能发生的缺点,衡量该项缺点或能造成的影响,并拟定为防止或检测该缺点应改善的设计控制,并推动其标准化作业,且必须配合设计发展之程序反复执行.DFMEA is Engineer or group to responsible scheme, As far as possible within the scope of the estimated product design on the possible faults in the product design stage, Measure the faults or can cause influence, and plan to prevent or testing the defect should be improved design control, and promote the standardized operation, and must fit in with the development of design program and implementation.最终成品及其所有相关的系统、子系统都应纳入评估.DFMEA是设计小组,即公司工程,运用设计,工程经验或分析方法等而形成的.The final and all related system, subsystem should be included in assessment. DFMEA is the design team, namely the company project, the use of design, engineering experience or analysis methods and form.DFMEA 必备条件DFMEA Essential Condition 确认已知及潜在的失效模式; Confirm the known and the potential failure mode. 确认每一个失效模式的效应和原因; Confirm each failure mode effect and reasons. 风险优先评估(严重性、发生频率、难检度); Risk priority evaluation (severity, occurrence frequency and di

文档评论(0)

1亿VIP精品文档

相关文档