变频调速电动机参数测试技术研究.pdfVIP

变频调速电动机参数测试技术研究 摘 要 在当前的测试领域中，传统的测试系统由于本身所固有的诸多弊端变得越来越 不适应现代测试的要求，需要从新的方向上寻找突破点，以解决当前测试系统的问 题。基于虚拟仪器的测试系统集虚拟仪器技术、测试技术于一体，利用虚拟仪器的 柔性、可扩充性，大大提高了测试系统的开发效率、可维护性和测试精度，使之更 好地满足现代化生产的需求。 本文主要研究了基于虚拟仪器的开发平台 LabVIEW 的变频调速电动机参数测 试技术，所需要的软件为 NI 公司（Nation Instrument ）开发的LabVIEW 语言。首 先本文分析了电参量测量、计算的基本原理，其次在此基础上根据实际电机系统的 参数测量要求，完成了系统硬件和软件的方案研究，并进一步完成了基于 LabVIEW 的虚拟仪器面板用户应用程序的开发。通过仿真检验证明，用户应用程序的设计满 足设计任务的要求。 关键词：变频调速，参数测试，虚拟仪器，LabVIEW I 变频调速电动机参数测试技术研究 Abstract Traditional test and measure system is not suitable for the requirement of modern test and measure technique because of many irregularities in themselves. It should be broken out from new ways to solve the problem of modern test and measure system. The virtual instrument techniques and the measurement techniques are gathered by the measurement system based on virtual instrument. The development efficiency, maintainability and measure precision of the measurement system are improved because of the flexibility and expansibility of virtual instrument. The test and measure technique for motor parameter based on VVVF is studied in this paper. LabVIEW software workbench supplied by NI company is used for virtual instrument design. Firstly, the theory of electrical parameter measuring and calculating is analyzed in the paper. Secondly, based on the foregoing analysis, the hardware and software of the design project of the system are completed according to the requirement of parameter test and measure of the actual electrical engineering system. The application program for front-panel client is accomplished. It proves that the design of application program is suitable