瑞典瑞晶4级步进控制器TT-S4_D.pdfVIP

TT-S4/D Step-controller, 4 steps Binary or sequential TT-S4/D is a micro-processor based step controller for controlling cooling or heating applications. The step- controller is controlled by a 0...10V signal from a TTC25/TTC40F or another controller/ DDC. * 4 sequential steps or 15 binary steps * Settable limit for number of steps * Input signal 0...10 V and 10...2 V * Built-in test facility for simple start-up testing * Analogue output for controlling a TTC25/40F in * Compact design for DIN-rail mounting with settings conjunction with output steps easily accessible on the front Function TT-S4/D is a step-controller designed primarily for Heater configuration control of electric heating. It can also step-control cooling In order to obtain more stable control the analogue out- units. The step-controller has four output relays and an put on the TT-S4/D is used for continuous control of part analogue output for continuous control of electric heaters. of the output of the heater via TTC25/TTC40F.Other part outputs are controlled via relays from the step controller. Function mode and number of steps The function mode can be selected by means of a slide- In sequential mode (S) the five groups should be of equal switch on the front, sequential or binary. In sequential size. In binary mode (B) the output of the first step should mode (S) the four output relays are activated one after