瑞典瑞晶6级步进控制器TT-S6_D.pdfVIP

TT-S6/D Step controller with 6 steps Binary or in sequence TT-S6/D is a microprocessor based step controller for controlling electric heaters etc. The step controller is controlled by a 0...10V signal from a TTC25/TTC40F regulator or from another controller or DDC. * 6 steps in sequence or 64 steps binary. * Supply-air fan provides run on time delay. * Input signal 0...10V. * Settable limit for number of steps. * Analogue output for control of TTC25/40F integrated * Built-in test facility for simple start-up testing. with step activation. Function TT-S6 is a step-controller designed for controlling electric Time delays heaters etc. It can also be used to step-control cooling In order to reduce start-up time while still maintaining processes.It has six relay outputs for controlling heater stable control, the TT-S6/D has a specially developed groups and an analogue output for sequential control of time-delay function for activating/deactivating output electric heaters. Alternatively the sixth relay can be used steps. When increasing or decreasing power output as a run on time relay for heater after-cooling. In this there is a 10 second delay between steps. For change of case the step-controller works with five steps. direction (from increase to decrease or vice-versa) there is a 30 second delay. Operating mode and step setting The operating mode is selected by means of the Heater power-distribution sli