机械设计与制造专业毕业论文--复式传热回转圆筒干燥器结构毕业设计.docVIP

摘 要 回转圆筒干燥器因为其结构简单、运行可靠、连续操作、适应能力强、处理能力大及维修方便等优势，目前广泛适用于冶金、建材、化工、煤炭等行业，成为颗粒状物料的首选干燥设备。本次设计根据实际要求，通过采用复式传热的结构设计达到提高效能的目的。该主要结构：等。 本次设计主要进行的设计。先对的发展概况及设计的指导思想、特点、任务进行概述进行完方案论证，然后确定方案。在技术设计部分具体叙述了的主要技术性能和参数，计算，进一步的确定的各个基本参数。然后对的各个部件进行总体布置，使其能以最优化的方式排列。最后对设计的进行稳定性校核，使符合稳定性的要求。最后在符合整体任务设计的要求后进行技术经济性分析尽可能的使自己设计的的成本降低。总之，整个设计是在紧张有序地过程中完成的。 本次设计主要是通过对设计后，经过分析、设计、校核，使得本设计达到了任务书的设计要求。 Duplex heat transfer the rotary dryerand structure design Abstract Rotary dryerand because of its simple structure , reliable operation , continuous operation , adaptable, large capacity and easy maintenance advantages, now widely used in metallurgy, building materials , chemicals , coal and other industries , to become the preferred drying of granular materials devices. The design based on the actual requirements through the design of the structure of the duplex heat transfer to improve the performance purpose . The main structure of the device include: the inner cylinder, outer cylinder, rolling ring , support equipment , gear and accessories . This design complex structure design of heat transfer of rotary drum dryer. On the guiding ideology of the development and design of dryer, features, an overview of tasks you plan and scheme. Technical design described in part of specific complex heat transfer main technical performance and parameter of rotary drum dryer, heat calculation according to the amount of dry material, further determination of the basic parameters of dryer. And then on the General layout of each part of the dryer so that it can be arranged in the most optimal manner. Stability check the last design of dryer, dryers meet the stability requirement. Last in line with the overall task of design requirements for technical and economic analysis as possible cost reductions for the drying of your own design. In short, the entire design was completed by the intense and orderly manner in the process. This design is mainly through the penthouse heat transfer rotary cylinder dry