轮轨基本训练课件.ppt

(*) Example: Critical Speed (1) Pre-Processing Processing Post-Processing Body Database Offline Time Integration General Plots Track Definition Eigenmode Analysis Ride Comfort Body Definition Root Loci Joints Definition Critical Speed Force Elements Database Nominal Forces Linearisation Track Irregularities Profile Generation (*) Critical Speed (2) Plot of critical speed against conicity (or other parameter) Determined with special method: fast and accurate Automatic iteration of critical speed v λ (*) Example: Critical Speed (3) Open ParVar configuration window Select ParVar case “Critical_Speed” Start and end velocity [km/h] need not to be set here, only the type  Second (middle) loop variates e.g.  equivalent conicity, σ and ε (*) Example: Critical Speed (4) Parameter Variation of Critical Speed No results need to be defined Select “Generate Quasilinear Wheel- Rail Profiles” in pre-calculations level 2 Every time you select the linear wheel-rail profiles to be variated in any form (wheel radius, linear parametersλ, σ, ε, ...): Use the pre-calculation! Otherwise the variation does not work. (*) Example: Critical Speed (5) Parameter Variation of Critical Speed Set parameters of iteration method: Initial value, increment, maximum and precision in [km/h] (as selected in inner loop configuration) v λ ? initial value ? raises with increment until critical damping or maximum is reached ? iterates to critical speed with given precision ? next value of middle loop: same procedure If necessary, set frequency range to be searched for critical eigenvalue (middle loop) (inner loop - automatic iteration) and so on ?Linear method“is faster. Disable if results seem strange (*) Example: Critical Speed (6) Parameter Variation of Critical Speed Open Parameter Variation Plot “Critical Parameter” Click on “Plot” Other representations are only available if there