SN3910通用高亮LED驱动应用开发指南.pdfVIP

Preliminary SN3910 Universal High Brightness LED Driver General Description Features The SN3910 is an open loop, current mode, control LED Switch mode controller for single switch LED drivers driver IC. The SN3910 operates constant off-time mode. It Open loop peak current controller allows efficient operation of High Brightness (HB) LEDs Wide input range from 8VDC to 450VDC or from voltage sources ranging from 8VDC up to 450VDC or 110V /220V AC AC 110V /220V . The SN3910 includes a PWM dimming AC AC Application from a few mA to more than 1A output input that can accept an external control signal with a duty ratio of 0 - 100% and a frequency of up to a few kilohertz. Up to hundreds of LEDs It also includes a 0 - 250mV linear dimming input which Constant off-time operation can be used both for linear dimming and temperature Linear and PWM dimming capability compensation of the LED current. Requires few external components for operation The SN3910 is ideally suited for buck LED drivers. Since Temperature compensation to regulate LED current the SN3910 operates in open loop current mode control, the SOP-8 package controller achieves good output current regulation without the need for any loop compensation. PWM dimming Applications response is limited only by the rate of rise and fall of the