毕业论文-功率机的设计.doc

信息工程学院本科毕业论文 （2013届） 题 目 功率机的设计 系 电子工程 专 业 电子信息工程 班 级 学 号 学生姓名 白炳恒 指导教师 马金龙 完成日期 2012年12月  诚 信 承 诺 我谨在此承诺：本人所写的毕业论文《功率机的设计》均系本人独立完成，没有抄袭行为，凡涉及其他作者的观点和材料，均作了注释，若有不实，后果由本人承担。 承诺人（签名）： 年 月 日 摘 要 本文设计了一种采用ADI公司电能计量芯片ADE7755作为主测量芯片的功率测量机。功率机可提供基于输电线电压和电流计算的瞬时有功功率和平均有功功率采用两个ADC将电流通道采集到的电流通过一个增益放大器放大可供选择放大倍数为1、2、8、16电压通道完成电压的采集这两个通道都是模拟通道因此在此之后要加入ADC将模拟信号转换为数字信号然后经过乘法器算出功率将得到的结果经过数字-频率转换器完成转换即从管脚CF输出的是能量频率此频率与能量大小成正比。本毕业设计主要设计自主研发的 关键词： ABSTRACT This paper introduces a design of the company by ADI electric energy metering ADE7755 chip power measuring machine, it can provide based on transmission line voltage and current calculation of the instantaneous active power and the average active power. Based on the two ADE ADC sampling, collected respectively with electrical voltage and current of the digital quantity, by ADE7755 analysis, again by ADE of CF feet output frequency, enter all the single chip microcomputer to do data operation, can according to the linear relationship between the power that the size, direct, convenient, high efficiency and accuracy than direct use AD sampling voltage current in multiplication method is much higher. In the single chip microcomputer after operation, and finally through the 1602 LCD to display, can very good realize power measurement. This design USES is tandem access, the appliances to the design of the lug plate, on the power machine to plug the mains socket. More than can be realized with the total power of the electrical measurement. This graduation design, the main design independent research and development of the power machine, mainly used in household appliances power measurement, in the background of the global energy conservation and emission reduction, how to reasonably use small power of household appliances, more appropriate the present situation. We design the power machine can rapidly to a electrical appliances for powe